93-1
|
研究獎勵 |
機械系 |
Alternative α-level-cut methods for optimum structural design with fuzzy Resources |
80-1
|
研究獎勵 |
機械系 |
Load Distributions Along a Short-Fiber in Discontinuous Fiber Composites Using Aduanced Modified Shear-Lag Analysis |
94-1
|
研究獎勵 |
機械系 |
Level-Cut Approaches of First and Second Kind for Unique Solution Design in Fuzzy Engineering Optimization Problms |
80-1
|
研究獎勵 |
機械系 |
應用有限元素法於工具機主軸的多目標最佳化設計 |
96-1
|
研究獎勵 |
機械系 |
An immunity based hybrid evolutionary algorithm for engineering optimization |
83-1
|
研究獎勵 |
機械系 |
Fuzzy weighting optimization with several objective functions in structural design |
99-1
|
研究獎勵 |
機械系 |
Topological Optimum Design Considering Stress Constraint Using Approximate Function |
97-1
|
研究獎勵 |
機械系 |
A post-design of topology optimization for mechanical compliant amplifier in MEMS |
92-1
|
研究獎勵 |
機械系 |
廣義霍普菲爾神經網路為基的外加處罰函數無限制次序最佳化技術 |
88-1
|
研究獎勵 |
機械系 |
Hopfield Neuron Based Nonlinear Constrained Programming to Fuzzy Structural Engineering Optimization |
85-1
|
研究獎勵 |
機械系 |
Pareto optimization of alternative global criterion method for fuzzy structural design |
96-1
|
研究獎勵 |
機械系 |
An intergrated design of flexure hinges and topology optimization for monolithic compliant mechanism |
95-1
|
研究獎勵 |
機械系 |
Reliability-Based Optimization of Robust Feasibility in Mechanical Design Using PVP Technique and Fuzzy Formulation |
95-1
|
研究獎勵 |
機械系 |
Multiobjective Design Optimization of Flexure Hinges for Enhancing the Performances of Micro-Mechanisms |
82-1
|
研究獎勵 |
機械系 |
亞當氏阻尼複合樑的偏微分枝法最優設計 |
98-1
|
研究獎勵 |
機械系 |
Computational Identification of Link Adjacency and Joint Incidence in Kinematic Chains and Mechanisms |
87-1
|
研究獎勵 |
機械系 |
Methods of pairwise comparisons and fuzzy global criterion for multiobjective optimization in structural engineering |
79-1
|
研究獎勵 |
機械系 |
Optimum design of laminated composite structures for enhanced damping characteristics |
81-1
|
研究獎勵 |
機械系 |
具阻尼性及多變數複合材料樑之設計最佳化 |
86-1
|
研究獎勵 |
機械系 |
Weighting objectives strategy in multicriterion fuzzy mechanical and structural optimization |
93-1
|
研發處: 研究計畫 (科技部) |
機械系 |
微機電順從機構的拓樸最佳化及設計(III) |
91-1
|
研發處: 研究計畫 (科技部) |
機械系 |
微機電順從機構的拓撲最佳化及設計(I) |
90-1
|
研發處: 研究計畫 (科技部) |
機械系 |
模糊設計變數及模糊參數的全面穩健機械結構最佳化設計 |
89-1
|
研發處: 研究計畫 (科技部) |
機械系 |
全面穩健機械最佳化設計(2/2) |
88-1
|
研發處: 研究計畫 (科技部) |
機械系 |
全面穩健機械最佳化設計(1/2) |
86-1
|
研發處: 研究計畫 (科技部) |
機械系 |
強健信賴度為基的最佳化方法於多目標工程設計研究 |
84-1
|
研發處: 研究計畫 (科技部) |
機械系 |
模糊神經網路演繹法的最佳結構設計 |
83-1
|
研發處: 研究計畫 (科技部) |
機械系 |
類神經網路的工程設計最佳化 |
82-1
|
研發處: 研究計畫 (科技部) |
機械系 |
多目標軟性最佳化的比較及棣屬函數的研究(Ⅱ) |
81-1
|
研發處: 研究計畫 (科技部) |
機械系 |
多目標軟性最佳化的比較及棣屬函數的研究 |