STUDY ON THE DEGREE OF ASSEMBLY FOR INJECTED COMPONENTS IN A MULTI-CAVITY MOLD SYSTEM
學年 109
學期 2
發表日期 2021-05-30
作品名稱 STUDY ON THE DEGREE OF ASSEMBLY FOR INJECTED COMPONENTS IN A MULTI-CAVITY MOLD SYSTEM
作品名稱(其他語言)
著者 Tsai-Wen Lin; Chao-Tsai (CT) Huang; Wen-Ren Jong; Shia-Chung Chen
作品所屬單位
出版者
會議名稱 Polymer Engineering and Science International 2021: PESI 2021
會議地點 Kenting, Taiwan(Online)
摘要 The assembly of the multi-components of injection parts is commonly encountered. However, there is little information about the degree of assembly for injected multiple components. In this study, we have tried to investigate the degree of assembly using a multi-cavity mold system with two different components. The study methods include numerical simulation and experimental observation. Firstly, we have tried to define the characteristic length for further to understand the degree of assembly. Then, we have adopted packing pressure as the practical operation parameter to observe the variation of degree of assembly. Results showed that when a higher packing pressure applied in injection molding, it will increase the difficulty of assembling Part A and B by simulation. Furthermore, the experimental validation on the degree of assembly based on the characteristic lengths has also performed. Both simulation and experimental results have similar trends. However, there is some gap between simulation prediction and experimental measurement for the same operation condition setting. To reduce that gap, future work is planned.
關鍵字 injection molding;CAE simulation;multi-cavity mold;degree of assembly
語言 en
收錄於
會議性質 國際
校內研討會地點
研討會時間 20210530~20210603
通訊作者
國別 TWN
公開徵稿
出版型式
出處 Polymer Engineering and Science International 2021,PESI-2021 Proceedings
相關連結

機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/121296 )