The flow-fiber coupling behavior and its effect on the dimensional variation of fiber-reinforced plastics (FRP) injection parts
學年 109
學期 2
發表日期 2021-05-30
作品名稱 The flow-fiber coupling behavior and its effect on the dimensional variation of fiber-reinforced plastics (FRP) injection parts
作品名稱（其他語言）
著者 Cheng-Hong Lai; Chao-Tsai Huang; Jia-Hao Chu; Wei-Wen Fu; Sheng-Jye Hwang; Hsin-Shu Peng; Chih-Che Wu; Chun-I Tu
作品所屬單位
出版者
會議名稱 Polymer Engineering and Science International 2021: PESI 2021
會議地點 Kenting, Taiwan(Online)
摘要 Due to fiber reinforced plastics (FRP) materials have become one of the main lightweight technologies. The reason why fibers can enhance plastic property is because of their microstructural properties. Among the microstructural properties, the fiber orientation is one of the most important factors to influence product quality. However, the fiber orientation is still not easy to be understood. In addition, during the injection molding process, some interactions exist between melt flow and fibers. How these interactions affect the process and products is not yet fully understood. Hence, in this study, the flow-fiber coupling effect on FRP injection parts has been investigated using a geometry system with three ASTM D638 specimens. The study methods include both numerical simulation and experimental observation. Results showed that through the fiber orientation distribution (FOD) study, the flow-fiber coupling effect is not significantly at the near gate region (NRG). It might result from too strong shear force to hold down the appearance of the flow-fiber interaction. However, at the end of filling region (EFR), the flow-fiber coupling effect tries to diminish the flow direction orientation tensor component A11 and enhance the cross-flow orientation tensor component A22 simultaneously. This orientation distribution behavior variation has been verified using micro-computerized tomography (-CT) scan and images analysis by AVIZO software. Finally, the flow-fiber coupling effect also verified based on the shrinkage of the injected parts through different flow domains.
關鍵字 injection molding;flow-fiber coupling;fiber orientation distribution;fiber reinforced plastic (FRP) material
語言 en
收錄於
會議性質 國際
校內研討會地點 無
研討會時間 20210530~20210603
通訊作者
國別 TWN
公開徵稿
出版型式
出處 Polymer Engineering and Science International 2021，PESI-2021 Proceedings
相關連結

機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/121295 )

SDGS 尊嚴就業與經濟發展,產業創新與基礎設施,永續城市與社區,負責任的消費與生產