Design, Manufacturing, and Flight Testing of an Experimental Flying Wing UAV
學年 107
學期 2
出版（發表）日期 2019-07-28
作品名稱 Design, Manufacturing, and Flight Testing of an Experimental Flying Wing UAV
作品名稱（其他語言）
著者 Pei-Hsiang Chung; Der-Ming Ma; Jaw-Kuen Shiau
單位
出版者
著錄名稱、卷期、頁數 Applied Science 9(15), p.3043
摘要 This paper presents the design, manufacturing, and flight testing of an electric-powered experimental flying wing unmanned aerial vehicle (UAV). The design process starts with defining the performance requirements including the stall speed, maximal speed, cruise altitude, absolute ceiling, and turn radius and speed. The wing loading and associated power loading are obtained based on the defined performance requirements. The wing area, UAV mass, and power requirements are determined from the endurance and payload requirements. The power requirement determines the motor size. Aerodynamics and stability designs are obtained based on the selected airfoil and obtained wing area. After completing the design, the UAV is manufactured using composite materials. The UAV is equipped with an AXi 4130/20 kv305 brushless motor and a Pixhawk flight control board. Its total weight is 8.6 kg. Flight tests were conducted to evaluate the UAV’s performance and dynamic characteristics and to demonstrate the success of the design.
關鍵字 UAV design;flight testing;flying wing
語言 en_US
ISSN 2076-3417
期刊性質 國外
收錄於 SCI
產學合作
通訊作者 Jaw-Kuen Shiau
審稿制度 否
國別 CHE
公開徵稿
出版型式 ,電子版
相關連結

機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/120829 )

SDGS 優質教育