A novel anatomical thin titanium mesh plate with patient-matched bending technique for orbital floor reconstruction
學年 107
學期 1
出版(發表)日期 2018-09-01
作品名稱 A novel anatomical thin titanium mesh plate with patient-matched bending technique for orbital floor reconstruction
作品名稱(其他語言)
著者 Chih-Hao Chen; Chien-Tzung Chen; Po-Fang Wang; Yu-Tzu Wang; Pin-Hsin Hsu; Chun-Li Lin
單位
出版者
著錄名稱、卷期、頁數 Journal of Cranio-Maxillofacial Surgery 46(9), p.1526-1532
摘要 This study developed an anatomical thin titanium mesh (ATTM) plate for Asian orbital floor fracture based on the medical image database. The computer aided stamping analysis was performed on four hole/slot patterns included the control type without hole design, circular hole pattern, slot pattern and hole/slot hybrid patterns within the ATTM plate with upper/lower dies of averaged orbital cavity reconstruction models. The curved-fan ATTM plate with 0.4 mm thickness was manufactured and pre-bent using a patient matched stamping process to verify its feasibility and the interfacial fitness between the plate and bone on the orbital floor fracture model. The stamping analysis found that the hole/slot hybrid patterns design resulted in the most favorable performance among all designs owing to the lowest maximum von-Mises stress/strain and spring-back value. The interfacial adaption results test showed that the average patient-matched stamping bending gap size was only 0.821 mm and the operative time was about 8 s. This study concluded that the curved-fan ATTM plate with hole/slot hybrid pattern design and patient-matched pre-bent technique can fit the ATTM plate/orbital cavity interface well, decrease unstable fracture segment mobility and improve the overall reduction efficiency.
關鍵字 Bending;Orbital floor fracture;Patient-matched;Plate;Stamping analysis
語言 en_US
ISSN
期刊性質 國外
收錄於 SCI
產學合作
通訊作者
審稿制度
國別 TWN
公開徵稿
出版型式 ,電子版
相關連結

機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/119562 )

SDGS 良好健康和福祉