Manufacturing and tribological properties of copper matrix/carbon nanotubes composites
學年 99
學期 2
出版（發表）日期 2011-02-10
作品名稱 Manufacturing and tribological properties of copper matrix/carbon nanotubes composites
作品名稱（其他語言）
著者 C.B. Lina; Zue-Chin Chang; Y.H. Tung; Yuan-Yuan Ko
單位
出版者
著錄名稱、卷期、頁數 Wear 270(5-6), pp.382-394
摘要 The dry wear tests were introduced to investigate the tribology properties varying with the contents of carbon nanotubes, the sliding velocity and the normal loadings on martensitic S45C carbon steels and the copper matrix composites with 5, 10, 15 and 20 vol.% carbon nanotubes, which are fabricated by the vacuum sintering method. The friction coefficient increases as the content of carbon nanotubes decreases and the wear rate shows the lowest value when the carbon nanotubes content is 10–15 vol.%. The rise of stick-slip effect results in that the friction coefficient and the contact resistance increased with the increasing of sliding velocity. Because of the effect in decreasing the stick-slip phenomenon and in increasing the plow and seizing wear, the tribology properties do not change apparently with the increasing of loads. In summary, when PV value is 1.802, the wear rate is the highest.
關鍵字 Copper matrix/carbon nanotubes composite;Electroless-plating copper;Tribology;Friction coefficient;Wear rate
語言 en_US
ISSN 0043-1648
期刊性質 國外
收錄於 SCI
產學合作
通訊作者
審稿制度 否
國別 USA
公開徵稿
出版型式 ,電子版
相關連結

機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/106085 )

SDGS 尊嚴就業與經濟發展,產業創新與基礎設施