Formation of multilayer poly(acrylic acid)/poly(vinylidene fluoride) composite membranes for pervaporation | |
---|---|
學年 | 93 |
學期 | 1 |
出版(發表)日期 | 2004-09-01 |
作品名稱 | Formation of multilayer poly(acrylic acid)/poly(vinylidene fluoride) composite membranes for pervaporation |
作品名稱(其他語言) | |
著者 | Lin, Dar-Jong; Chang, Cheng-liang; Shaw, Horng-yue; Jeng, Yi-su; Cheng, Liao-ping |
單位 | 淡江大學化學工程與材料工程學系 |
出版者 | Wiley |
著錄名稱、卷期、頁數 | Journal of Applied Polymer Science 93(5), pp.2266-2274 |
摘要 | Dual- and multilayer composite membranes, consisting of poly(acrylic acid) (PAA) and poly(vinylidene fluoride) (PVDF), were synthesized by the plasma-induced polymerization technique. The dual-layer membrane had a dense PAA layer grafted onto a microporous PVDF substrate, whereas in the multilayer membranes, the grafted PAA and the PVDF layers were arranged in an alternating sequence (e.g., PAA/PVDF/PAA and PAA/PVDF/PAA/PVDF/PAA). These membranes were used in a pervaporation process to separate ethanol–water solutions. For the dual-layer membranes, the results indicated that the separation factor increased and the permeation flux decreased with increasing amounts of grafted PAA. For the case of grafting yield < 0.6 mg/cm2, the composite membrane demonstrated poor separation. As the grafting yield reached 0.85 mg/cm2, a sharp increase of the separation factor was observed. For the multilayer membranes, the pervaporation performances were very good, with high separation factors (on the order of 100) and reasonable permeation fluxes over a wide ethanol concentration range. |
關鍵字 | |
語言 | en |
ISSN | 1097-4628 |
期刊性質 | |
收錄於 | |
產學合作 | |
通訊作者 | |
審稿制度 | 否 |
國別 | |
公開徵稿 | |
出版型式 | |
相關連結 |
機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/53700 ) |