| A study on process and tribological behavior of Al alloy/Gr. (p) composite | |
|---|---|
| 學年 | 86 |
| 學期 | 2 |
| 出版（發表）日期 | 1998-05-15 |
| 作品名稱 | A study on process and tribological behavior of Al alloy/Gr. (p) composite |
| 作品名稱（其他語言） | |
| 著者 | Lin, C. B.; Chang, R. J.; Weng, W. P. |
| 單位 | 淡江大學機械與機電工程學系 |
| 出版者 | Elsevier |
| 著錄名稱、卷期、頁數 | Wear 217(2), pp.167-174 |
| 摘要 | A process and an equipment have been successfully used to manufacture 6061 aluminum alloy/0–6 wt.% (6 μm) graphite particulate composite material. The graphite particulates are distributed uniformly within the Al alloy matrix. The results showed that tensile properties of these composites have been reduced. However, the hardness is remaining practically unchanged. In the wear microstructure of the unreinforced alloy, we can observe the ploughing generated by the hard Al chip clusters on the wearing material. The tribological behavior of the composites in the T6 heat-treated condition is better than in the annealed condition or than that of the unreinforced alloy. The wear weight loss is reduced with increasing content of graphite particulates and sliding speed. |
| 關鍵字 | Aluminum matrix graphite particulate composite;Tensile;Hardness;Wear;Plough;Tribological |
| 語言 | en |
| ISSN | 0043-1648 |
| 期刊性質 | 國外 |
| 收錄於 | |
| 產學合作 | |
| 通訊作者 | |
| 審稿制度 | 否 |
| 國別 | NLD |
| 公開徵稿 | |
| 出版型式 | ,紙本 |
| 相關連結 |
機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/45693 ) |
| SDGS | 產業創新與基礎設施 |
GoogleAnalytics