Analysis of mold flow and microstructures of die casting in Al alloy/SiC(p) composites
學年 87
學期 2
出版（發表）日期 1999-05-01
作品名稱 Analysis of mold flow and microstructures of die casting in Al alloy/SiC(p) composites
作品名稱（其他語言）
著者 Lin, C. B.; Wu, C. L.; Chiang, C. H.
單位 淡江大學機械與機電工程學系
出版者 Springer
著錄名稱、卷期、頁數 Journal of materials science 34(9), pp.2229-2240
摘要 The report involves a study of the microstructure of tensile, impact and three-point bending samples of aluminum alloy/SiC(p) composites produced by die casting. The results show that in impact samples, 80 μm SiC particulates cluster along the left and right edges of the section vertical plane with the notch plane, and near the notch. In tensile and three-point bending samples, they were distributed uniformly in the matrix. Furthermore, porosities occurred near the notch in the impact samples. The 80 μm SiC particulates will undergo settling in the shot biscuit. There exist arc and irregular shapes in the clustering section of the particulate. The dendrite arm spacing (DAS) is larger in this section. From the shot biscuit to the bending section of the sprue; the quantity of SiC particulate is less. The SiC particulate is clustered in the protrusive region where the injector pins are situated. We can decrease the porosity of die casting samples effectively by designing the overflow well in a wave shape. We can prevent the melt from adhering to the surface of the mold cavity, thermal cracking on the surface of die casting samples and wear on plungers using electroless nickel plating on the SiC particulate.
關鍵字 Porosity;Mold;Settling;Vertical Plane;Irregular Shape
語言 en
ISSN 0022-2461
期刊性質 國外
收錄於
產學合作
通訊作者
審稿制度 否
國別 USA
公開徵稿
出版型式 ,電子版
相關連結

機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/45845 )

機構典藏連結
SDGS 尊嚴就業與經濟發展,產業創新與基礎設施