教師資料查詢 | 類別: 期刊論文 | 教師: 康尚文 KANG SHUNG-WEN (瀏覽個人網頁)

標題:Fabrication of polydimethylsiloxane (PDMS) pulsating heat pipe
學年
學期
出版(發表)日期2009/02/01
作品名稱Fabrication of polydimethylsiloxane (PDMS) pulsating heat pipe
作品名稱(其他語言)
著者Lin, Yu-hsing ; 康尚文; Kang, Shung-wen; Wu, Tsung-yu
單位淡江大學機械與機電工程學系
出版者Elsevier
著錄名稱、卷期、頁數Applied Thermal Engineering 29(2-3), pp.573-580
摘要This paper reports on the preliminary experimental results of using polydimethylsiloxane (PDMS) to manufacture a visual pulsating heat pipe with length, width and internal diameter of 56 mm, 50 mm and 2 mm, respectively, including the manufacturing process, the vacuuming management for filling and packaging. The experiment used methanol and ethanol as working fluids. A fix filled ratio (about 60%) and different heating power values (3–8 W) were used to test the thermal performance. A high-speed video camera was used to record the working situation of the working fluid inside the channel. The results are discussed and analyzed. The experiment shows that methanol, in a vertical orientation, shows the most efficient results. When the heating power is 3 W, the thermal resistance is more than 4.5 °C/W below the value for ethanol as the working fluid. For a heating power of 4 W, the average temperature decreases to 15 °C in the evaporator. Also, gravity will have an impact on the PHP performance: the vertical orientation is better as compared to the horizontal orientation.
關鍵字PDMS;Pulsating heat pipes;Turn over the mould;Filled ratio
語言英文
ISSN1359-4311
期刊性質國內
收錄於
產學合作
通訊作者
審稿制度
國別中華民國
公開徵稿
出版型式,電子版
相關連結
SDGs
Google+ 推薦功能,讓全世界都能看到您的推薦!