電漿滲氮處理對鋼材之鑽石車削性及刀具磨耗影響之研究
學年 96
學期 1
發表日期 2007-11-23
作品名稱 電漿滲氮處理對鋼材之鑽石車削性及刀具磨耗影響之研究
作品名稱(其他語言) Study of the Machinability and Tool Wear Mechanisms Involved in Single Point Diamond Turning of Various Plasma Nitrided Steel Materials
著者 吳俊易; 張家榮; 趙崇禮; 周文成; 陳俊傑; 馬廣仁; 陳峰志;許巍耀
作品所屬單位 淡江大學機械與機電工程系
出版者
會議名稱 2007 CSME CONF中國機械工程學會第24屆全國學術研討會=The 24th National Conference on Mechanical Engineering the Chinese Society of Mechanical Engineers
會議地點 臺北市, 臺灣
摘要 不鏽鋼及其他的鐵系金屬被歸類為不可鑽石車削加工,因為在鑽石與鐵金屬之間所產生的熱化學反應將造成不可接受的磨耗。近年來已有研究將不鏽鋼試片在低溫的狀態( Stainless steel and other ferrous metals are normally classified as not diamond turnable for the unacceptable tool wear caused by the thermal-chemical reaction between diamond and ferrous metals. In the present research, stainless steel specimens were plasma nitrided at a relatively low temperature (
關鍵字 單點鑽石車削;離子滲氮;表面處理;Single point diamond turning;Plasma nitrided;Surface finish
語言 zh_TW
收錄於
會議性質 國內
校內研討會地點
研討會時間 20071123~20071124
通訊作者
國別 TWN
公開徵稿 Y
出版型式 紙本
出處 2007 CSME CONF中國機械工程學會第24屆全國學術研討會論文集=Proceedings of the 24th National Conference on Mechanical Engineering the Chinese Society of Mechanical Engineers,6頁
相關連結

機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/96467 )

機構典藏連結