Improvement in Performance of Cool Discharge Systems from Ice Melting with Producing Chilled Air under Constant Heat Flux and External Refluxes
學年 92
學期 2
出版（發表）日期 2004-02-01
作品名稱 Improvement in Performance of Cool Discharge Systems from Ice Melting with Producing Chilled Air under Constant Heat Flux and External Refluxes
作品名稱（其他語言）
著者 葉和明
單位 淡江大學化學工程與材料工程學系
出版者
著錄名稱、卷期、頁數 Numerical Heat Transfer 45(5), p.505-516
摘要 The effects of recycle at the ends on the heat transfer through two parallel plates with one side heated and the other side insulated in cool-thermal discharge systems by melting ice have been studied to produce chilled air under constant heat flux at the free liquid surface. The mathematical formulation was derived from an analysis of the heat transfer coupled with a moving boundary to estimate the required air mass flow rate by direct contact of air with melting ice. The numerical results show that the recycle can enhance the heat transfer rate, and thus lower outlet chilled air temperature during on-peak daytime hours, represented graphically and compared with that in an open duct of the same working dimensions without recycle. Three examples of inlet air temperatures with specified discharge fluxes are discussed. The effect of recycle on the enhancement of heat transfer efficiency is also delineated.
關鍵字
語言 zh_TW
ISSN
期刊性質 國內
收錄於 SCI EI
產學合作
通訊作者
審稿制度 否
國別 TWN
公開徵稿
出版型式 ,電子版
相關連結

機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/71754 )

機構典藏連結