Determination of an Ethylene Bisdithiocarbamate Based Pesticide (Nabam) by Cobalt Phthalocyanine Modified Carbon Ink Electrode | |
---|---|
學年 | 92 |
學期 | 2 |
出版(發表)日期 | 2004-06-01 |
作品名稱 | Determination of an Ethylene Bisdithiocarbamate Based Pesticide (Nabam) by Cobalt Phthalocyanine Modified Carbon Ink Electrode |
作品名稱(其他語言) | |
著者 | Lin, Meng-shan |
單位 | 淡江大學化學學系 |
出版者 | Wiley-Blackwell |
著錄名稱、卷期、頁數 | Electroanalysis 16(11), p.904-909 |
摘要 | A phthalocyanine based sensor, for anodic detection of sodium ethylene bisdithiocarbamate (Nabam) by coating a mixture of cobalt phthalocyanine (CoPC) modified carbon ink on the surface of a glassy carbon electrode, has been described. The modified ink was prepared by mixing three percent of cobalt phthalocyanine into carbon ink and then diluting the mixture with cyclohexanone in w/w ratio of 1/9. A suitable portion (or 1 μL) of ink mixture was then dip-coated on a rotating disk glassy carbon electrode. The modified ink electrode was air-dried for 15 mins before use. In comparison to the bare ink electrode on which the oxidation of Nabam takes place at 300 mV (vs. 3 M Ag/AgCl), the oxidation potential (−125 mV) of Nabam at the CoPC modified ink decreases significantly. A typical calibration plot of Nabam proportionally increases over the concentration range of 2.5 to 36 μM (R=0.9990). The detection limit is estimated about 28.8 nM (S/N=3) and its response time (between 10% to 90% of steady-state response) is about 5.3 s at the injection of 5 μM Nabam. The sensitivity requirement of JMPR meeting (Joint FAO/WHO Meeting on Pesticide Residues) for ethylene bisdithiocarbamates (EBDCs) is achieved by this proposed scheme. |
關鍵字 | Ethylene bisdithiocarbamate;Nabam;Cobalt Phthalocyanine |
語言 | en_US |
ISSN | 1521-4109 |
期刊性質 | 國外 |
收錄於 | SCI |
產學合作 | |
通訊作者 | |
審稿制度 | 否 |
國別 | TWN |
公開徵稿 | |
出版型式 | ,電子版 |
相關連結 |
機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/54233 ) |