Path planning for robot-assisted grinding processes
學年 89
學期 2
發表日期 2001-05-21
作品名稱 Path planning for robot-assisted grinding processes
作品名稱（其他語言）
著者 Wang, Yin-tien; Jan, Y. J.
作品所屬單位 淡江大學機械與機電工程學系
出版者 Washington: IEEE Computer Society
會議名稱 Robotics and Automation, 2001. Proceedings 2001 ICRA. IEEE International Conference on
會議地點 Seoul, Korea
摘要 Path planning for a robot-assisted surface finishing system with an active torque controller is presented. We utilize a dexterous manipulator to attain the desired position and orientation in three-dimensional space during finishing processes. A single-axis active controller consists of a DC motor and a software observer is attached to the robot wrist and used to actuate a pneumatic hand-grinder. The torque observer is designed to sense the grinding contact force based on the driving current and output position of the motor. Zigzag and fractal paths on curved surfaces are designed for the grinding processes. In order to determine an ideal grinding condition, Taguchi's method for experimental design is utilized. We choose four grinding conditions, namely, path pattern, grinding contact pressure, tool diameter, and feed rate. Tendencies of these factors can be found from the experiments. In this research, the prototype of a robot-assisted finishing system is constructed and tested on a Tatung A330 robot. The experimental results show that the robot-assisted finishing system functions well under a variety of grinding conditions.
關鍵字
語言 en
收錄於
會議性質 國際
校內研討會地點
研討會時間 20010521~20010526
通訊作者
國別 KOR
公開徵稿
出版型式
出處 Robotics and Automation, 2001. Proceedings 2001 ICRA. IEEE International Conference on (Volume:1 ), pp.331-336
相關連結

機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/38190 )

機構典藏連結