期刊論文

學年 98
學期 1
出版(發表)日期 2009-08-01
作品名稱 Modeling extraction separation of Cu(II) in hollow-fiber modules
作品名稱(其他語言)
著者 Guo, Jia-Jan; Ho, Chii-Dong; Tu, Jr-Wei
單位 淡江大學化學工程與材料工程學系
出版者 Kidlington: Pergamon
著錄名稱、卷期、頁數 Chemical Engineering Science 64(15), pp.3455-3465
摘要 The mass transfer problems in the hollow-fiber membrane extractor module with concurrent- and countercurrent-flow were investigated theoretically and experimentally in this study. A two-dimensional mathematical model of the hollow-fiber membrane extractor module was developed theoretically and the shell side flow described by Happel's free surface model was taken into account. The analytical solution is obtained using an eigenfunction expansion in terms of the power series and an orthogonal expansion technique. The theoretical predictions were represented graphically with the mass-transfer Graetz number (Gz), flow pattern and packing density (φ) as parameters and the theoretical results were also compared with those obtained by experimental runs. The highest extraction rate, extraction efficiency and mass transfer efficiency can be achieved by arranging the packing density φ=0.3. The results show that the device performance of the countercurrent-flow device is better than that of the concurrent-flow device. The experiments of the extraction of Cu2+ by using D2EHPA with PVDF hollow fibers is also set up to confirm the accuracy of the theoretical predictions. The accuracy of the theoretical predictions for concurrent- and countercurrent-flow are 5.87×10-2≤E1≤6.69×10-2 and 2.46×10-2≤E1≤3.48×10-2, respectively, for Gza=40.8.
關鍵字 Extraction;Mass transfer;Mathematical modeling;Membrane;Separations;Simulation
語言 en
ISSN 0009-2509 1873-4405
期刊性質 國外
收錄於 SCI EI
產學合作
通訊作者 Ho, Chii-Dong
審稿制度
國別 GBR
公開徵稿
出版型式 ,電子版,紙本
相關連結

機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/60387 )

機構典藏連結