| 105 / 1 |
Numerical simulation and experimental study on physical mechanism in multiple component moulding
|
|
2017-05-18 |
| 106 / 1 |
Numerical visualization and optimization on the core penetration in multi-cavity co-injection molding with a bifurcation runner structure
|
|
2018-07-26 |
| 106 / 1 |
Melt Creep Recovery of Polyamide 6 and Polypropylene Nanocomposites Blended with Layered Silicate
|
|
2018-07-26 |
| 107 / 1 |
Simulation of dynamic gas penetrations on fingering behaviors during gas-assisted injection molding
|
|
2019-02-20 |
| 107 / 1 |
Simulation Prediction of the Fiber Breakage History in Regular and Barrier Structure Screws in Injection Molding
|
|
2019-02-20 |
| 107 / 1 |
Miscibility and toughness improvement of poly(lactic acid)/poly(3-Hydroxybutyrate) blends using a melt-induced degradation approach
|
|
2019-02-20 |
| 108 / 1 |
Investigation of the Viscoelastic Behavior Variation of Glass Mat Thermoplastics (GMT) in Compression Molding.
|
#尊嚴就業與經濟發展 #產業創新與基礎設施 #永續城市與社區 #負責任的消費與生產
|
2020-04-15 |
| 108 / 1 |
Investigation on the internal mechanism of the deviation between numerical simulation and experiments in injection molding product development.
|
#尊嚴就業與經濟發展 #產業創新與基礎設施 #永續城市與社區 #負責任的消費與生產
|
2020-04-15 |
| 109 / 1 |
Investigation on the Fiber Orientation Distributions and Their Influence on the Mechanical Property of the Co-Injection Molding Products
|
#尊嚴就業與經濟發展 #產業創新與基礎設施 #永續城市與社區 #負責任的消費與生產
|
2021-03-23 |
| 110 / 1 |
Investigation on the Coupling Effects Between Flow and Fibers on Fiber-Reinforced Plastic (FRP) Injection Parts
|
|
2021-12-15 |
| 110 / 1 |
Investigation on the Machine Calibration Effect on the Optimization through Design of experiments (DOE) in Injection Molding Parts
|
|
2021-12-15 |
| 110 / 1 |
Flow-induced Orientations of Fibers and Their Influences on Warpage and Mechanical Property in Injection Fiber Reinforced Plastic (FRP) Parts.
|
|
2021-12-15 |
| 110 / 1 |
Influence of low-fracture-fiber mechanism on fiber/melt-flow behavior and tensile properties of ultra-long-glass-fiber-reinforced polypropylene composites injection molding
|
|
2021-12-15 |
| 111 / 1 |
The Low Breaking Fiber Mechanism and Its Effect on the Behavior of the Melt Flow of Injection Molded Ultra-Long Glass Fiber Reinforced Polypropylene Composites
|
|
2023-11-29 |
| 111 / 1 |
A Methodology to Predict and Optimize Ease of Assembly for Injected Parts in a Family-Mold System
|
|
2023-11-29 |
| 112 / 1 |
Correlation Between Fiber Orientation and Geometrical Shrinkage of Injected Parts Under the Influence of Flow-Fiber Coupling Effect
|
|
2024-01-06 |
| 112 / 1 |
Fabrication and Property Characterization of Long-Glass-Fiber-Reinforced Polypropylene Composites Processed Using a Three-Barrel Injection Molding Machine
|
|
2024-01-06 |
| 112 / 1 |
Investigation of Parameter Sensitivity and the Physical Mechanism for the Formation of a Core-Skin-Core (CSC) Structure in Two-Stage Co-Injection Molding
|
|
2024-01-06 |
| 112 / 1 |
Influence of back pressure and geometry on microstructure of injection-molded long-glass-fiber-reinforced polypropylene ribbed plates.
|
|
2024-01-06 |