關鍵字:

教師資料查詢 | 教師:何啟東

# 學年期 類別 標題
1231 87-1 會議論文 Upward-type multiple-effect solar distillers
1232 90-2 會議論文 Effect of aspect ratio on collector efficiency of solar fluid heaters with collector area fixed
1233 85-2 會議論文 Simulation of optimal zone lengths for each pass in multipass zone-refining processes
1234 93-1 會議論文 Modeling of multi-pass solar air heaters with external refluxes
1235 90-1 會議論文 Cool thermal discharge over melting ice with producing chilled air by complete removal of melt
1236 90-2 會議論文 Chilled air produced with air flowing over melting ice in cool-thermal discharge systems
1237 93-2 會議論文 Modeling and simulation of multi-pass counterflow laminar mass exchangers
1238 92-2 會議論文 Modeling of heat transfer in multi-pass coolers or heaters
1239 91-1 會議論文 平行板式融冰釋冷系統之研究
1240 94-1 會議論文 平板型順流式薄膜氣體吸收解析解之研究
1241 94-1 會議論文 平板型逆流式薄膜氣體吸收系統之研究
1242 92-1 會議論文 The theoretical study of parallel-plate cool-thermal discharge system with external reflux
1243 86-1 會議論文 出料流率比於連續式熱擴散塔提煉重水之研究
1244 91-1 會議論文 Modeling of the multi-pass counterflow laminar mass exchanger
1245 94-1 會議論文 An analytical study of the countercurrent parallel-plate dialysis membrane system coupled with ultrafiltration
1246 89-2 會議論文 Design and operation of analog computers for normal-freezing processes
1247 87-2 會議論文 Modified upward-type multiple-effect solar distillers
1248 85-1 會議論文 類比模擬器於帶域精煉程序之設計與操作
1249 86-1 會議論文 固定熱通量於融冰冷度釋放系統之研究
1250 87-1 會議論文 溫度分布於水層和冰層中冷度釋放系統之研究
1251 87-1 會議論文 二行程太陽能空氣加熱器之研究
1252 86-1 會議論文 熱對流邊界條件於融冰冷度釋放系統之研究
1253 86-1 會議論文 多行程帶域精煉程序中試樣棒形狀對分離效率之影響
1254 87-1 會議論文 類比模擬器於變異分佈係數的帶域精煉程序之應用
1255 91-1 會議論文 Simulation of the recycle effects on the performance for enrichment of heavy water in inclined thermal-diffusion columns
1256 85-1 會議論文 多行程帶域精煉程序中最佳帶域長度之模擬
1257 90-1 會議論文 迴流效應於融冰冷度釋放系統之冷空氣出口溫度的改善
1258 93-2 會議論文 The influence of the inclined angle on the heavy water enrichment in double-pass thermal-diffusion columns with external recycle
1259 87-1 會議論文 同心套管螺旋狀綑線之螺旋傾斜角和出料比率對分離度之影響
1260 94-1 會議論文 An analytical study in membrane extraction through a double-flow laminar concurrent parallel-plate module