Enhanced reliability of LEDs encapsulated with surface-modified zirconia/silicone hybrids under thermal shock
學年 106
學期 2
出版（發表）日期 2018-02-15
作品名稱 Enhanced reliability of LEDs encapsulated with surface-modified zirconia/silicone hybrids under thermal shock
作品名稱（其他語言）
著者 Yen-Ting Lin; Yen-Hsien Li; I-Ann Lei; Chih-Yu Kuo; Chia-Fen Lee; Wen-Yen Chiu; Trong-Ming Don
單位
出版者
著錄名稱、卷期、頁數 Materials Chemistry and Physics 206, p.136-143
摘要 This study focused on the importance of the interfacial adhesion in the zirconia (ZrO2)/silicone hybrids as the encapsulating material on the reliability of the LEDs. Surface-modified ZrO2 nanoparticles (m-ZrO2) with functional groups were prepared by a sol-gel reaction which could become reactive to the silicone resin. The produced m-ZrO2/silicone hybrid at 5 wt% had a refractive index of 1.569 at 633 nm and light transmittance of 98.9%. Moreover, the coefficient of thermal expansion was greatly reduced by the introduction of m-ZrO2 into the silicone resin. When using this m-ZrO2/silicone hybrid, the luminous flux of the LED was 10.1% higher than that using a neat silicone resin. Most importantly, the LEDs encapsulated with the m-ZrO2/silicone had the best performance under thermal shock among all the LEDs tested in this study, owing to its strong interfacial adhesion between the nanoparticles and matrix. Moreover, the thermal stresses developed in hybrids were calculated and found to agree with the performance evaluation of the encapsulated LEDs under thermal shock, in which the m-ZrO2/silicone hybrid had the lowest thermal stress. This study proposed that the m-ZrO2/silicone hybrid material with strong interfacial adhesion could be useful for the encapsulation of LEDs even under extreme thermal conditions.
關鍵字 LED;Silicone;Zirconia;Encapsulation;Thermal shock
語言 en
ISSN
期刊性質 國外
收錄於 SCI
產學合作
通訊作者 Trong-Ming Don
審稿制度 是
國別 NLD
公開徵稿
出版型式 ,電子版
相關連結

機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/113022 )