教師資料查詢 | 類別: 會議論文 | 教師: 黃招財 CHAO-TSAI HUANG (瀏覽個人網頁)

標題:Cavity Dependence of Core Penetration in Co-Injection Multi-Cavity Molding
學年104
學期2
發表日期2016/07/25
作品名稱Cavity Dependence of Core Penetration in Co-Injection Multi-Cavity Molding
作品名稱(其他語言)
著者Chao-Tsai (C.T.) Huang; Chih-Chung Hsu; Rong-Yeu Chang; Shi-Chang Tseng
作品所屬單位
出版者
會議名稱Annual Meeting of Polymer Processing Society(PPS-32)
會議地點Lyon, France
摘要Co-injection molding is commonly used in daily accessories, car parts, and structural-reinforcement product. However, there are too many combinations of designs, materials, core/skin ration, and process condition, how to have suitable control of co-injection is very challenge. Furthermore, co-injection with multi-cavity system which is commonly applied in some forks structure products. However, due to the complicated nature, the inside mechanism for the combination of co-injection and multi-cavity is still not fully understood yet. In this study, we have proposed three kinds of multi-cavity systems to investigate cavity design influence on the core material penetration behavior. In Model 1 with three separated cavity system, the core penetration into individual cavity is strongly dependent on the timing of complete filled of the first cavity. Although flow rate conditions will affect the penetration history during the processing, it doesn’t change the final core penetration shape too much. To realize how the flow rate effect is, we have applied slicing technology to discover the core penetration behavior and its history. Clearly, when the flow rate is increased, it is easier for the core material penetrated into thickness direction in the upstream period. It will push more skin material into downstream. It ends up a low core ratio into the cavities and has a more non-uniform skin/core distribution. On the other hand, we have also considered different thickness of connection between cavities in Model 2 (with 3.5 mm thick connector) and Model 3 (with 1.75 mm thick connector). During the early filling age (less than 90% of total volume filled), in Model 3, it is Branch 2 dominant; while in Model 2 it has no preference for Branch 1 and 2. The flow rate conditions have no significant effects for core penetration in this period. However, as more melt keeps flowing into cavities till the end of filling, the core penetration behavior is dramatically different at low flow rate (10 cm3/s). These results show that in the presence of different thickness of connector, the core penetration history and final shapes are significant different to that of separated cavity system (Model 1). Obviously, cavity design can alter the preference of core penetration from one side to the other. The results can help people for the management of skin/core distribution in co-injection molding.
關鍵字Multi-component molding;co-injection molding;core penetration;skin to core ratio
語言英文
收錄於
會議性質國際
校內研討會地點
研討會時間20160725~20160729
通訊作者
國別法國
公開徵稿
出版型式
出處PPS-32 Proceeding
相關連結
Google+ 推薦功能,讓全世界都能看到您的推薦!