Effect of chemical roughening on adhesive strength of aluminum flake doped ABS/PC overmoulded with SEBS.
學年 99
學期 1
出版（發表）日期 2011-01-13
作品名稱 Effect of chemical roughening on adhesive strength of aluminum flake doped ABS/PC overmoulded with SEBS.
作品名稱（其他語言）
著者 Lin, C.B.; Chang, Z.C.; Hsueh, H.-C.; Wang, W.-C.
單位
出版者
著錄名稱、卷期、頁數 Plastics, Rubber & Composites: Macromolecular Engineering 41(8), p.350-357
摘要 Acrylonitrile butadiene styrene+20 wt-% polycarbonate (PC)/27 wt-% aluminium flake metallised plastics were immersed in aqueous H2SO4 for chemical roughening. The adhesive strengths of the metallised plastics that were roughened at various corrosion temperatures (30–90°C) for various times (10–30 min) with styrene–ethylene–butene–styrene at various melting temperatures (180–220°C) were investigated. Experimental results indicate that the aluminium flakes reduce the activation energy of the metallised plastics in aqueous H2SO4 at 30–70°C. The roughness and the weight rate of the roughened metallised plastics increase with corrosion temperature and time. Corrosion at 70°C for 10 min yields the largest effective adhesive area and adhesive strength. The adhesive strength increases with the melting temperature of styrene–ethylene–butene–styrene.
關鍵字 Aluminium flake;Metallised plastics;Chemical roughening;Adhesive strength
語言 en
ISSN 1465-8011; 1743-2898
期刊性質 國內
收錄於 SCI
產學合作
通訊作者
審稿制度 否
國別 GBR
公開徵稿
出版型式 ,電子版
相關連結

機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/106087 )

SDGS 尊嚴就業與經濟發展,產業創新與基礎設施