A Three-Component Strain Gage Dynamometer for Grinding and Polishing Force Measurement
學年 93
學期 2
出版（發表）日期 2005-04-01
作品名稱 A Three-Component Strain Gage Dynamometer for Grinding and Polishing Force Measurement
作品名稱（其他語言）
著者 劉昭華; Liu, Chao-hwa; Chen, C. A.; Lin, Chia-yen; Lin, Chia-jui
單位 淡江大學機械與機電工程學系
出版者 New York: Springer New York LLC
著錄名稱、卷期、頁數 Journal of Materials Engineering and Performance 14(2), p.173-178
摘要 The design of a strain gage dynamometer to measure three-dimensional grinding forces during surface finishing of molds and dies is presented in this article. The dynamometer is composed of four measuring blocks to which strain gages are attached. The measuring blocks in this study were designed so that when strain gages are attached at particular places, the blocks deform in such a way that forces in the x, y, and z directions can be separated with little interaction. This behavior was confirmed with finite-element results, and static calibrations performed on the measuring blocks further verified this behavior. In this study, the dynamometer is used to measure grinding forces in a surface-finishing system with a hand grinder mounted on a spindle of a machining center.
關鍵字 dynamometer;force measurement;grinding;polishing
語言 en
ISSN 1059-9495; 1544-1024
期刊性質 國外
收錄於 SCI EI
產學合作
通訊作者
審稿制度 否
國別 USA
公開徵稿
出版型式 ,電子版,紙本
相關連結

機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/45658 )

機構典藏連結
SDGS 尊嚴就業與經濟發展,產業創新與基礎設施