Imposing compliance on grinding and polishing
學年 93
學期 1
出版（發表）日期 2005-01-01
作品名稱 Imposing compliance on grinding and polishing
作品名稱（其他語言）
著者 劉昭華; Liu, Chao-hwa; Chen, C.-C. A.; Li, Po-i; Hsu, Ta-chieh
單位 淡江大學機械與機電工程學系
出版者 Inderscience
著錄名稱、卷期、頁數 International Journal of Materials and Product Technology 22(4), pp.274-288
摘要 Compliance is imposed upon the workpiece holder of a polishing/grinding system. Experiment results show that in a polishing process compliance may compensate position and geometry errors of the workpiece, and also compensate errors due to tool wear. During a grinding process it is shown that compliance may absorb high frequency disturbance from the outside, making grinding results unaffected. For a polishing system with compliance, experiment results suggest that soft springs (i.e. springs with greater values of compliance) may compensate workpiece geometry error better. Also, surface roughness decrease with increasing either translational or rotation speed of the polishing ring, and, up to a limit, a smaller pre-load depth gives rise to a smoother surface. A series of experiments based on Taguchi's method for parameter design are performed to determine better combinations of compliance with other polishing parameters, and results show that surface roughness may be greatly reduced.
關鍵字 polishing;grinding;mould and die;process compliance;error compensation;tool wear;position errors;geometry errors;surface roughness;Taguchi methods;parameter design
語言 en
ISSN
期刊性質 國內
收錄於 SCI EI
產學合作
通訊作者
審稿制度 否
國別 TWN
公開徵稿
出版型式 ,電子版
相關連結

機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/45738 )

機構典藏連結
SDGS 尊嚴就業與經濟發展,產業創新與基礎設施