Synthesis and characterization of UV- and thermo-curable difunctional epoxyacrylates
學年 100
學期 2
出版(發表)日期 2012-02-01
作品名稱 Synthesis and characterization of UV- and thermo-curable difunctional epoxyacrylates
作品名稱(其他語言)
著者 Su, Yu-Chieh; Cheng, Liao-Ping; Cheng, Kuo-Chung; Don, Trong-Ming
單位 淡江大學化學工程與材料工程學系
出版者 Lausanne: Elsevier S.A.
著錄名稱、卷期、頁數 Materials Chemistry and Physics 132(2–3), pp.540–549
摘要 This paper describes the synthesis and characterization of difunctional epoxyacrylate oligomers from the reaction of diglycidyl ether of bisphenol-A (DGEBA) and acrylic acid (AA) in the presence of triphenyl phosphine as catalyst. The reaction was investigated in situ by using Fourier transform-infrared spectroscopy in the temperature range of 60–120°C, and demonstrated to be an addition esterification between the epoxide group and the carboxyl group. The specific rate constants calculated from the second-order kinetics obeyed Arrhenius law very well, and from which the activation energy was found to be 63.9 kJ mol−1. Moreover, various batches of respective epoxyacrylates, EA25 to EA100, were prepared by changing the equivalent ratio of carboxyl/epoxide from 0.25 to 1.0 in the feed under a temperature profile of 100°C for 2 h and another 2 h at 120°C. The epoxide conversions, acid values and epoxide equivalent weights of the produced EA25 to EA100 were all measured. The analysis by gel permeation chromatography revealed that the EA25 to EA75 consisted of unreacted DGEBA, monoacrylate-terminated epoxyacrylate and bisacrylate-terminated epoxyacrylate; while the EA100 was composed of only latter two. Increasing the initial carboxyl/epoxide equivalent ratio increased the epoxide conversion and the amount of bisacrylate-terminated epoxyacrylate. Yet, with an initial carboxyl/epoxide equivalent ratio of 0.5, the EA50 produced the maximum proportion (∼72%) of monoacrylate-terminated epoxyacrylate, which had one terminal double bond for UV-cure and one epoxide end group for thermo-cure. This dual-curable epoxyacrylate thus can be used as an adhesive sealant for LCD production.
關鍵字 Chemical synthesis; Fourier transform infrared spectroscopy (FTIR); Adhesion; Epoxyacrylate
語言 en
ISSN 0254-0584
期刊性質 國外
收錄於 SCI
產學合作
通訊作者 Don, Trong-Ming
審稿制度
國別 CHE
公開徵稿
出版型式 紙本
相關連結

機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/75117 )

機構典藏連結