| Friction welding of similar materials: PP, HDPE and Nylon 6 | |
|---|---|
| 學年 | 91 |
| 學期 | 1 |
| 出版（發表）日期 | 2003-01-01 |
| 作品名稱 | Friction welding of similar materials: PP, HDPE and Nylon 6 |
| 作品名稱（其他語言） | |
| 著者 | Ching-Bin Lin, Li Cheng Wu, Yu Yao Chen |
| 單位 | 淡江大學機械與機電工程學系 |
| 出版者 | |
| 著錄名稱、卷期、頁數 | Journal of Biomaterials Science. Polymer Edition 91(5), pp.2771–2780 |
| 摘要 | The effects of spin-friction pressure and timing on the friction welding between parts of the same materials, PP, HDPE, and nylon-6, are discussed. The heat-affected zone is divided into three regions: the plasticized region (Zpl), the partly plasticized region (Zpd), and the undeformed region (Zud). The tensile fracture morphology has three main sections: the nonplasticized central section (Fud), the plasticized peripheral section (Fpl), and the partly plasticized section between Fud and Fpl (Fpd). Friction pressures (spinning timing) of 1.17 MPa (16 s) in PP–PP welding, 1.77 MPa (8 s) in HDPE–HDPE welding, and 0.98 MPa (8, 10, and 12 s) in nylon-6–nylon-6 welding attains better bonding strength because their components have larger Fpd and Fpl regions, which have no Fud in the central part. |
| 關鍵字 | |
| 語言 | en |
| ISSN | 1568-5624 |
| 期刊性質 | 國外 |
| 收錄於 | |
| 產學合作 | |
| 通訊作者 | |
| 審稿制度 | 否 |
| 國別 | GBR |
| 公開徵稿 | |
| 出版型式 | ,電子版,紙本 |
| 相關連結 |
機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/65314 ) |
| SDGS | 尊嚴就業與經濟發展,產業創新與基礎設施 |
GoogleAnalytics