ABS+20wt%PC/鋁鱗片複合材料之射出成型暨性質探討
學年 86
學期 1
發表日期 1997-10-04
作品名稱 ABS+20wt%PC/鋁鱗片複合材料之射出成型暨性質探討
作品名稱(其他語言)
著者 劉江興; 林清彬; 李清杉; 曾令豪; 夏國彥
作品所屬單位 淡江大學機械與機電工程學系
出版者
會議名稱 一九九七年尖端材料及製造科技學術研討會=The 1997 Conference on the Advanced Materials and Process Engineering Technologies
會議地點 臺中, 臺灣
摘要 本研究已成功製得ABS+20wt% PC/(24wt%, 30wt%)鋁鱗片之金屬化塑膠,其中鋁鱗片之平均展弦比為156。由顯微結構觀察發現鋁鱗片在射口易造成層間聚集,在澆道的堆積較不明顯,而在澆口與基材之分佈則較均勻;鋁鱗片含量24wt%因沒有形成導電網路故其遮蔽值及導電係數較低,而鋁鱗片含量30wt%易搭接形成導電網路,故其遮蔽值及導電係數較高,在0~200MHz高達50~60dB,在1500MHz約25dB。 The research has produced a metallized plastic of ABS+20wt% PC with 24wt% and 30wt% A1 flake and the average aspect ratio is 156. From the OM, we found the A1 flake clustered around the sprue but the runner did not, the matrix and the gate well-distributed. We also found the 24wt% which contain A1 flake did not form a conductive network, the 30wt% which contain A1 flake lapped and formed a conductive network easily, so the shielding effectiveness and conductivity coefficient are higher than the 24wt% which contain A1 flake. When the frequency is 0~200MHz and 1500MHz, the shielding effectiveness is 50~60 dB and 25dB.
關鍵字 金屬化塑膠;展弦比;射口;澆口;澆道;導電網路;遮蔽值;導電係數;Metallized Plastic;Aspect Ratio;Sprue;Gate;Runner;Conductive Network;Shielding Effectiveness;Conductivity Coefficient
語言 zh_TW
收錄於
會議性質 國內
校內研討會地點
研討會時間 19971004~19971004
通訊作者
國別 TWN
公開徵稿
出版型式 紙本
出處 一九九七年尖端材料及製造科技學術研討會論文集=Proceedings of the 1997 Conference on the Advanced Materials and Process Engineering Technologies,頁70-76
相關連結

機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/38100 )

機構典藏連結