期刊論文
| 學年 | 93 |
|---|---|
| 學期 | 1 |
| 出版（發表）日期 | 2005-01-01 |
| 作品名稱 | Imposing compliance on grinding and polishing |
| 作品名稱（其他語言） | |
| 著者 | 劉昭華; Liu, Chao-hwa; Chen, C.-C. A.; Li, Po-i; Hsu, Ta-chieh |
| 單位 | 淡江大學機械與機電工程學系 |
| 出版者 | Inderscience |
| 著錄名稱、卷期、頁數 | International Journal of Materials and Product Technology 22(4), pp.274-288 |
| 摘要 | Compliance is imposed upon the workpiece holder of a polishing/grinding system. Experiment results show that in a polishing process compliance may compensate position and geometry errors of the workpiece, and also compensate errors due to tool wear. During a grinding process it is shown that compliance may absorb high frequency disturbance from the outside, making grinding results unaffected. For a polishing system with compliance, experiment results suggest that soft springs (i.e. springs with greater values of compliance) may compensate workpiece geometry error better. Also, surface roughness decrease with increasing either translational or rotation speed of the polishing ring, and, up to a limit, a smaller pre-load depth gives rise to a smoother surface. A series of experiments based on Taguchi's method for parameter design are performed to determine better combinations of compliance with other polishing parameters, and results show that surface roughness may be greatly reduced. |
| 關鍵字 | polishing;grinding;mould and die;process compliance;error compensation;tool wear;position errors;geometry errors;surface roughness;Taguchi methods;parameter design |
| 語言 | en |
| ISSN | |
| 期刊性質 | 國內 |
| 收錄於 | SCI EI |
| 產學合作 | |
| 通訊作者 | |
| 審稿制度 | 否 |
| 國別 | TWN |
| 公開徵稿 | |
| 出版型式 | ,電子版 |
| 相關連結 |
機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/45738 ) |