期刊論文
| 學年 | 110 |
|---|---|
| 學期 | 2 |
| 出版（發表）日期 | 2022-04-20 |
| 作品名稱 | Study of Gas-to-Liquid Heat Pipe Heat Exchanger |
| 作品名稱（其他語言） | |
| 著者 | Pratik Prakash Gupta; Sundararaj Senthilkumar; Shung-Wen Kang |
| 單位 | |
| 出版者 | |
| 著錄名稱、卷期、頁數 | Processes 10(5), 808 |
| 摘要 | This study is focused on the study and development of a gas-to-liquid heat pipe heat exchanger (HPHE) based on numerical and experimental analysis. Stainless steel heat pipes were installed inside the heat exchanger in the form of three equilateral triangles, staggered into a hexagonal configuration to simulate the waste heat recovery from hot exhaust gas to a water flow. The first main aim of this study was focused on 3D design and numerical analysis, which were used to create and calculate the effect of similar input conditions on the overall system. The system was tested for the overall heat transfer by measuring the temperature change in both fluids. The heat transfer and overall average temperature were used to calculate the effectiveness of the system. In the second part of this study, a test of the waste heat recovery was undertaken with this setup, using water as the cooling fluid. The study was conducted with different input velocities and temperatures of waste hot air, controlled simultaneously by the input fan and air heater, whereas the cooling water was kept at a steady state of 30 ◦C and 0.0156 kg/s at the input. The hot air velocity was controlled by fans with different inlet air velocities of 0.3 m/s, 0.5 m/s, and 0.7 m/s. Moreover, the temperature of the air was changed from 150 ◦C to 250 ◦C with a step of 25 ◦C. The increase in temperature and the velocity of air was directly proportional to the amount of heat transferred from the air to the cooling water, and the effectiveness was also found to be inversely proportional to both of the varying input parameters. The numerical study showed a maximum increase of 12% in the heat transfer. The output temperatures of hot and cold fluids showed maximum increases of 7 K and 3 K, respectively. The numerical system with such input parameters can be evaluated further to predict the behavior of changes in the design and parameters. |
| 關鍵字 | heat pipe;heat exchanger;waste heat recovery;gas-to-liquid;effectiveness;numerical analysis |
| 語言 | en |
| ISSN | 2227-9717 |
| 期刊性質 | 國外 |
| 收錄於 | SCI Scopus NotTSSCI |
| 產學合作 | |
| 通訊作者 | Shung-Wen Kang |
| 審稿制度 | 是 |
| 國別 | CHE |
| 公開徵稿 | |
| 出版型式 | ,電子版,紙本 |
| 相關連結 |
機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/122674 ) |