期刊論文
| 學年 | 103 |
|---|---|
| 學期 | 2 |
| 出版（發表）日期 | 2015-06-01 |
| 作品名稱 | Preparation of conjugated polymer-based composite thin film for application in solar cell |
| 作品名稱（其他語言） | |
| 著者 | Yang-Yen Yu; Wen-Chen Chien; Yu-Hsin Ko; Chih-Ping Chen; Chao-Ching Chang |
| 單位 | |
| 出版者 | |
| 著錄名稱、卷期、頁數 | Thin Solid Films 584, pp.363-368 |
| 摘要 | This paper reports on the enhanced cell efficiency of structures and properties of regioregular poly(3- hexylthiophene) (P3HT)/multiwalled carbon nanotube (MWNT) hybrid materials. The prepared hybrid materials were characterized using ultraviolet–visible absorption spectroscopy, photoluminescence spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. Different concentrations of these MWNTs were suspended in polymer solutions and spin-cast onto indium tin oxide (ITO) glass. Solar cells with a device structure of ITO/poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate)/P3HT:MWNTs/aluminum were then produced using evaporated aluminum as the back contact. The results showed that the ratio of P3HT to MWNTs considerably influenced the performance of the fabricated solar cells. The efficiency of the solar cells increased with the ratio of carbon nanotubes. Monochromatic incident photon-to-electron conversion efficiency analysis was performed and the results indicated that at the optimal P3HT/MWNTs ratio (=1/1), the solar cells demonstrated a high-quality conversion of 2.16% with a fill factor of 42.22%, an open circuit voltage of 0.56 V, and a short circuit current of 9.12 mA/cm2. |
| 關鍵字 | Photovoltaic cells;Poly(3,4-ethylenedioxythiophene);Poly(4-styrenesulfonate);Poly(3-hexylthiophene);Multi-walled carbon nanotubes |
| 語言 | en |
| ISSN | 0040-6090 |
| 期刊性質 | 國外 |
| 收錄於 | SCI EI |
| 產學合作 | |
| 通訊作者 | |
| 審稿制度 | 是 |
| 國別 | NLD |
| 公開徵稿 | |
| 出版型式 | ,電子版,紙本 |
| 相關連結 |
機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/106125 ) |