期刊論文
| 學年 | 87 |
|---|---|
| 學期 | 2 |
| 出版（發表）日期 | 1999-03-01 |
| 作品名稱 | The effect of joint design and volume fraction on friction welding properties of A360/SiC (p) composites |
| 作品名稱（其他語言） | |
| 著者 | C. B. LIN; C. K. MU; W. W. WU; C. H. HUNG |
| 單位 | 淡江大學機械與機電工程學系 |
| 出版者 | American Welding Society |
| 著錄名稱、卷期、頁數 | Welding Journal 78(3), p.100-108 |
| 摘要 | This research uses a rotation friction welding system with 360Al and 360Al/5v-%-10v-% (v-% = volume fraction percent) SiC particulate composites utilizing both identical and different materials and two joint designs. In joint design 1, one side is a lead angle and the other is a plane. In joint design 2, both sides are planes. From the experiment, it was noted that using joint design 1 achieved better joint strength. The joint strength is best with 360Al-360Al and worst with 360Al/10v-%-360Al/10v-% SiC particulate composites. 360Al-360Al has a ductile fracture with dimples, while the 360Al/10v-%-360Al/10v-% SiC particulate composite has a low-ductile fracture. The 360Al/10v-%-360Al/10v-% SiC particulate composites are fractured in the Zpl zone, while the others are fractured in the interface between the Zpl zone and the Zpd zone. For the joint systems using different materials, the fracture is in the interface between the Zpl zone and Zpd zone, where the quantity of SiC particulate is higher. In the heat-affected zone (HAZ) for identical materials, the Zpl hardness value is smaller than Zud; for the different materials, the hardness in Zpl is half of the two Zud hardness total values. |
| 關鍵字 | |
| 語言 | en |
| ISSN | 0043-2296 |
| 期刊性質 | 國外 |
| 收錄於 | |
| 產學合作 | |
| 通訊作者 | |
| 審稿制度 | 否 |
| 國別 | USA |
| 公開徵稿 | |
| 出版型式 | ,紙本 |
| 相關連結 |
機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/45704 ) |