期刊論文

學年 99
學期 2
出版(發表)日期 2011-07-01
作品名稱 Design and Fabrication of Light Weight Current Collectors for Direct Methanol Fuel Cells using the MEMS Technique
作品名稱(其他語言)
著者 Sung, Min-Feng; Kuan, Yean-Der; Chen, Bing-Xian; Lee, Shi-Min
單位 淡江大學航空太空工程學系
出版者 Lausanne: Elsevier S.A.
著錄名稱、卷期、頁數 Journal of Power Sources 196(14), pp.5897-5902
摘要 The direct methanol fuel cell (DMFC) is suitable for portable applications. Therefore, a light weight and small size is desirable. The main objective of this paper is to design and fabricate a light weight current collector for DMFC usage. The light weight current collector mainly consists of a substrate with two thin film metal layers. The substrate of the current collector is an FR4 epoxy plate. The thin film metal layers are accomplished by the thermo coater technique to coat metal powders onto the substrate surfaces. The developed light weight current collectors are further assembled to a single cell DMFC.
關鍵字 The direct methanol fuel cell (DMFC) is suitable for portable applications. Therefore, a light weight and small size is desirable. The main objective of this paper is to design and fabricate a light weight current collector for DMFC usage. The light weight current collector mainly consists of a substrate with two thin film metal layers. The substrate of the current collector is an FR4 epoxy plate. The thin film metal layers are accomplished by the thermo coater technique to coat metal powders onto the substrate surfaces. The developed light weight current collectors are further assembled to a single cell DMFC test fixture to measure the cell performance. The results show that the proposed current collectors could even be applied to DMFCs because they are light, thin and low cost and have potential for mass production.
語言 en
ISSN 0378-7753
期刊性質 國外
收錄於
產學合作
通訊作者 Kuan, Yean-Der
審稿制度
國別 CHE
公開徵稿
出版型式 紙本
相關連結

機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/83691 )

機構典藏連結