會議論文

學年 97
學期 2
發表日期 2009-03-15
作品名稱 A novel copper bead heat sink for computer cooling
作品名稱(其他語言)
著者 Tsai, Meng-Chang; Kang, Shung-Wen; Lin, Chih-Hsien
作品所屬單位 淡江大學電機工程學系
出版者 New York: Institute of Electrical and Electronics Engineers (IEEE)
會議名稱 Semiconductor Thermal Measurement and Management Symposium, 2009. SEMI-THERM 2009. 25th Annual IEEE
會議地點 San Jose, USA
摘要 The power dissipation of CPU used in desktop computers has been steadily increasing with time. The tendency for a rise in the CPU capacity resulted at present in increasing heat release to 50-100W for desktop PC. The problem of the CPU cooling consists in restricting its temperature to 80-90degC. Current desktop computers use a heat sink of approximately 60 times 80 mm<sup>2</sup> base area. Desktop computers are typically cooled by heat sinks mounted on the CPU. There is also a fan installed to a heat sink forming an assembly that is attached to the CPU. Air is forced through the heat sink by the fan. The fan-heat sink mechanism will be the key component to solve the heat problems. We deliver a novel copper bead heat sink (CBHS), which is a heat sink combines a sinter hollow copper ball to be its fin, to increase the heat exchange surface area with cooling air. By the other way, we made a coaxial rotor on a fan to enhance the heat transfer coefficient of convection. The goal of this plan is to make a new fabrication process, and the new type heat sink can dissipate the heat effectively. Preliminary result showed that the minimum value for the total thermal resistance is 0.48degC/W under 65 W input power. The heater surface temperature is around 51degC. The results of the bead fan are almost the same by clockwise and counterclockwise. The holes on the bottom cannot bring better performance. The wind can't go through those holes into the sink center. Research work is continuing for the heat transfer enhance of CBHS.
關鍵字 CPU cooler;Copper bead sink;Heat sink;Sinter sink
語言 en
收錄於
會議性質 國際
校內研討會地點
研討會時間 20090315~20090319
通訊作者
國別 USA
公開徵稿 Y
出版型式
出處 Semiconductor Thermal Measurement and Management Symposium, 2009. SEMI-THERM 2009. 25th Annual IEEE, pp.228-231
相關連結

機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/76566 )

機構典藏連結