期刊論文
| 學年 | 99 |
|---|---|
| 學期 | 1 |
| 出版（發表）日期 | 2010-11-01 |
| 作品名稱 | Manufacturing and tribological properties of copper matrix/carbon nanotubes composites |
| 作品名稱（其他語言） | |
| 著者 | Lin, C.B.; Chang, Zue-chin; Tung, Y.H.; Ko, Yuan-yuan |
| 單位 | 淡江大學機械與機電工程學系 |
| 出版者 | Amsterdam: Elsevier BV |
| 著錄名稱、卷期、頁數 | Wear 270(5-6), pp.382-394 |
| 摘要 | The dry wear tests were introduced to investigate the tribology properties varying with the contents of carbonnanotubes, the sliding velocity and the normal loadings on martensitic S45C carbon steels and the coppermatrixcomposites with 5, 10, 15 and 20 vol.% carbonnanotubes, which are fabricated by the vacuum sintering method. The friction coefficient increases as the content of carbonnanotubes decreases and the wear rate shows the lowest value when the carbonnanotubes content is 10–15 vol.%. The rise of stick-slip effect results in that the friction coefficient and the contact resistance increased with the increasing of sliding velocity. Because of the effect in decreasing the stick-slip phenomenon and in increasing the plow and seizing wear, the tribology properties do not change apparently with the increasing of loads. In summary, when PV value is 1.802, the wear rate is the highest. |
| 關鍵字 | Copper matrix/carbon nanotubes composite; Electroless-plating copper; Tribology; Friction coefficient; Wear rate |
| 語言 | en |
| ISSN | 0043-1648 |
| 期刊性質 | 國外 |
| 收錄於 | SCI |
| 產學合作 | |
| 通訊作者 | Lin, C.B. |
| 審稿制度 | |
| 國別 | NLD |
| 公開徵稿 | |
| 出版型式 | 紙本 |
| 相關連結 |
機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/77296 ) |