期刊論文

學年 98
學期 2
出版(發表)日期 2010-04-01
作品名稱 Strain Analysis of Vapor Chamber Heat Spreaders
作品名稱(其他語言)
著者 Hung, Yu-Hsun ; Kang, Shung-Wen ; Tsai, Wan-Chun
單位 淡江大學機械與機電工程學系
出版者 Keelung: National Taiwan Ocean University
著錄名稱、卷期、頁數 Journal of Marine Science and Technology=海洋學刊 18(2), pp.277-283
摘要 Vapor chamber is a cooling device with phase change phenomena. It not only provides high heat transfer coefficient but also removes hot spot. During working of vapor chamber, the buckle force and vapor pressure could lead to deformation. It is a popular way that pillars are set up to reduce deformation. This paper presents a three-dimensional finite element analysis for the vapor chamber by ANSYS software program. Four pillars with two kinds of designs are built into vapor core in order to avoid deformation of the vapor chamber. The results appear that pillars inside vapor chamber are good to reduce strain up to 81-91%. The effects of thickness, materials, and heater sizes on the strain are discussed. The optimum pillar design can be obtained by cooperating with heater sizes, although the effective heat area may be possibly reduced. The results attained that the appropriate design of pillars could enhance structure performance of the vapor chamber.
關鍵字 Heat spreader;Vapor chamber;Strain;Finite element method
語言 en
ISSN 1023-2796
期刊性質 國外
收錄於 SCI EI
產學合作
通訊作者 Kang, Shung-Wen
審稿制度
國別 CHE
公開徵稿
出版型式 紙本
相關連結

機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/65385 )

機構典藏連結