期刊論文
| 學年 | 97 |
|---|---|
| 學期 | 2 |
| 出版（發表）日期 | 2009-02-01 |
| 作品名稱 | Development of disposable lipid biosensor for the determination of total cholesterol |
| 作品名稱（其他語言） | |
| 著者 | Shih, Wei-chung; Yang, Mei-chun; 林孟山; Lin, Meng-shan |
| 單位 | 淡江大學化學學系 |
| 出版者 | Elsevier |
| 著錄名稱、卷期、頁數 | Biosensors and Bioelectronics 24(6), pp.1679-1684 |
| 摘要 | A prototype chronoamperometric biosensor for the determination of total cholesterol was developed that consists of a homemade potentiostat and disposable strips immobilized with Fe3O4, cholesterol oxidase (ChOx), and cholesterol esterase (ChE). The principle of sensing cholesterol is based on the detection of reduction signal of hydrogen peroxide generated in two enzymatic reactions. The co-immobilization of ChE and ChOx allows the sensor to detect both concentrations of esterified and free cholesterol. The effects of biosensor on catalyst, enzymes, applied potential, and buffer pH was investigated, and the operation conditions were optimized. The detection of cholesterol can be accomplished in one step, a 10 μL of sample was dropped onto the area of sensing strip and the reduction signal was obtained at an applied potential of −200 mV (vs. Ag/Ag+). The pre-reaction time was set at 15 s before applying potential on the strip and the sampling time was 5 s. The sensing device displays a linear response over the range of 100–400 mg/dL (R2 = 0.999) for cholesteryl oleate. The coefficient variation was determined as 5.06% (N = 20) for 100 mg/dL cholesteryl oleate and the detection limit is 19.4 mg/dL (S/N = 3). The probable interferences in bio-matrix were selected to test the selectivity and no significant response was observed in the biosensor. |
| 關鍵字 | Chronoamperometry;Cholesterol biosensor;Fe3O4;Screen-printed;Disposable strip |
| 語言 | en |
| ISSN | 0956-5663 |
| 期刊性質 | 國外 |
| 收錄於 | |
| 產學合作 | |
| 通訊作者 | |
| 審稿制度 | 否 |
| 國別 | NLD |
| 公開徵稿 | |
| 出版型式 | ,紙本 |
| 相關連結 |
機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/50368 ) |