關鍵字查詢 | 類別:期刊論文 | | 關鍵字:Methyl Methacrylate)

[第一頁][上頁]1[次頁][最末頁]目前在第 1 頁 / 共有 30 筆查詢結果
序號 學年期 教師動態
1 106/2 化材系 張朝欽 副教授 期刊論文 發佈 Preparation of UV-cured spironaphthooxazine/silica/polyacrylate photochromic hard coatings on plastic substrates , [106-2] :Preparation of UV-cured spironaphthooxazine/silica/polyacrylate photochromic hard coatings on plastic substrates期刊論文Preparation of UV-cured spironaphthooxazine/silica/polyacrylate photochromic hard coatings on plastic substratesChao-Ching Chang; Lin Chen; Liao-Ping ChengPhotochromic;Hard coating;Spironaphthooxazine;Silica nanoparticle;UV-curing;Polyacrylate;Plastic substrateJournal of Coatings Technology and Research 15 (2), p.325-332Hard coatings exhibiting photochromic properties were prepared by UV-curing of formulations that incorporated surface-modified silica nanoparticles, hexa-functional curing agent, and organic dye (spironaphthooxazine) on poly(methyl methacrylate) (PMMA) substrates. Spectroscopic studies of the coatings indicated effective photochromic activities over the visible range in response to UV irradiation (365 nm). The color density and bleaching performance were found to depend on the silica and dye contents in the coatings; generally, increasing either quantity c
2 106/2 化材系 鄭廖平 教授 期刊論文 發佈 Preparation of UV-cured Spironaphthooxazine/Silica/Polyacrylate Photochromic Hard Coatings on Plastic Substrates , [106-2] :Preparation of UV-cured Spironaphthooxazine/Silica/Polyacrylate Photochromic Hard Coatings on Plastic Substrates期刊論文Preparation of UV-cured Spironaphthooxazine/Silica/Polyacrylate Photochromic Hard Coatings on Plastic SubstratesChao-Ching Chang; Lin Chen; Liao-Ping ChengPhotochromic;Hard coating;Spironaphthooxazine;Silica nanoparticle;UV-curing;Polyacrylate;Plastic substrateJournal of Coatings Technology and Research 15(2), p.325–332Hard coatings exhibiting photochromic properties were prepared by UV-curing of formulations that incorporated surface-modified silica nanoparticles, hexa-functional curing agent, and organic dye (spironaphthooxazine) on poly(methyl methacrylate) (PMMA) substrates. Spectroscopic studies of the coatings indicated effective photochromic activities over the visible range in response to UV irradiation (365 nm). The color density and bleaching performance were found to depend on the silica and dye contents in the coatings; generally, increasing either quantity co
3 106/1 化材系 鄭廖平 教授 期刊論文 發佈 Preparation of UV-cured spironaphthooxazine/silica/polyacrylate photochromic hard coatings on plastic substrates , [106-1] :Preparation of UV-cured spironaphthooxazine/silica/polyacrylate photochromic hard coatings on plastic substrates期刊論文Preparation of UV-cured spironaphthooxazine/silica/polyacrylate photochromic hard coatings on plastic substratesChao-Ching Chang; Lin Chen; Liao-Ping ChengJournal of Coatings Technology and Research 14, p.1-8Hard coatings exhibiting photochromic properties were prepared by UV-curing of formulations that incorporated surface-modified silica nanoparticles, hexa-functional curing agent, and organic dye (spironaphthooxazine) on poly(methyl methacrylate) (PMMA) substrates. Spectroscopic studies of the coatings indicated effective photochromic activities over the visible range in response to UV irradiation (365 nm). The color density and bleaching performance were found to depend on the silica and dye contents in the coatings; generally, increasing either quantity could increase the color density and raise the initial bleaching rate, and yet it took a longer time to completely
4 105/1 化材系 張朝欽 副教授 期刊論文 發佈 Preparation of HMDS-modified silica/polyacrylate hydrophobic hard coatings on PMMA substrates , [105-1] :Preparation of HMDS-modified silica/polyacrylate hydrophobic hard coatings on PMMA substrates期刊論文Preparation of HMDS-modified silica/polyacrylate hydrophobic hard coatings on PMMA substratesChang, Chao-ching; Wu, Yu-ting; Cheng, Liao-pingSilica nanoparticle;Hard coating;Transparent;Hydrophobicity;Nanocomposite coatingJournal of Coatings Technology and Research 13(6), p.999-1007Colloidal silica nanoparticles synthesized from tetraethoxysiliane via a sol–gel process were surface modified by 3-(trimethoxysilyl)propyl methacrylate (MSMA) and 1,1,1,3,3,3-hexamethyldisilazane (HMDS). MSMA acted both as a C=C provider and a coupling agent, whereas HMDS was used to prevent particle aggregation and engender hydrophobicity. The modified silica particles (HMSiO2) were UV-cured together with the crosslinking agent, dipentaerythritol hexa-acrylate (DPHA) to form coatings on poly(methyl methacrylate) (PMMA) substrates. Dynamic light scattering of the synthesized sols indicated that the average si
5 105/1 化材系 鄭廖平 教授 期刊論文 發佈 Preparation of HMDS-modified silica/polyacrylate hydrophobic hard coatings on PMMA substrates , [105-1] :Preparation of HMDS-modified silica/polyacrylate hydrophobic hard coatings on PMMA substrates期刊論文Preparation of HMDS-modified silica/polyacrylate hydrophobic hard coatings on PMMA substratesChang, Chao-ching; Wu, Yu-ting; Cheng, Liao-pingSilica nanoparticle;Hard coating;Transparent;Hydrophobicity;Nanocomposite coatingJournal of Coatings Technology and Research 13(6), p.999-1007Colloidal silica nanoparticles synthesized from tetraethoxysiliane via a sol–gel process were surface modified by 3-(trimethoxysilyl)propyl methacrylate (MSMA) and 1,1,1,3,3,3-hexamethyldisilazane (HMDS). MSMA acted both as a C=C provider and a coupling agent, whereas HMDS was used to prevent particle aggregation and engender hydrophobicity. The modified silica particles (HMSiO2) were UV-cured together with the crosslinking agent, dipentaerythritol hexa-acrylate (DPHA) to form coatings on poly(methyl methacrylate) (PMMA) substrates. Dynamic light scattering of the synthesized sols indicated that the average si
6 104/1 化材系 鄭廖平 教授 期刊論文 發佈 Preparation of zirconia loaded poly(acrylate) antistatic hard coatings on PMMA substrates , [104-1] :Preparation of zirconia loaded poly(acrylate) antistatic hard coatings on PMMA substrates期刊論文Preparation of zirconia loaded poly(acrylate) antistatic hard coatings on PMMA substratesChang, Chao-Ching; Hsieh, Chin-Yuan; Huang, Feng-Hsi; Cheng, Liao-Pingcoatings;composites;nanoparticles;nanowires and nanocrystals;structure-propertyJournal of Applied Polymer Science 132(33), pp.42411(6pages)Zirconia (ZrO2) nanoparticles were synthesized by hydrolysis and condensation of zirconium-n-propoxide (ZNP) in 1-propanol at the presence of methacrylic acid (MA), serving as a chelating agent for ZNP. The formed nanoparticles were chemically modified by the UV-curable coupling agent, 3-(trimethoxysilyl)propyl methacrylate (MSMA). The modified particles were then crosslinked with the hexa-functional monomer, dipentaerythritol hexaacrylate (DPHA), to produce transparent antistatic hard coatings on poly(methyl methacrylate) (PMMA) substrates. Sizes of the modified particles, as determined by the dynamic
7 104/1 化材系 張朝欽 副教授 期刊論文 發佈 Preparation of zirconia loaded poly(acrylate) antistatic hard coatings on PMMA substrates , [104-1] :Preparation of zirconia loaded poly(acrylate) antistatic hard coatings on PMMA substrates期刊論文Preparation of zirconia loaded poly(acrylate) antistatic hard coatings on PMMA substratesChang, Chao-Ching; Hsieh, Chin-Yuan; Huang, Feng-Hsi; Cheng, Liao-Pingcoatings;composites;nanoparticles;nanowires and nanocrystals;structure-propertyJournal of Applied Polymer Science 132(33), pp.42411(6pages)Zirconia (ZrO2) nanoparticles were synthesized by hydrolysis and condensation of zirconium-n-propoxide (ZNP) in 1-propanol at the presence of methacrylic acid (MA), serving as a chelating agent for ZNP. The formed nanoparticles were chemically modified by the UV-curable coupling agent, 3-(trimethoxysilyl)propyl methacrylate (MSMA). The modified particles were then crosslinked with the hexa-functional monomer, dipentaerythritol hexaacrylate (DPHA), to produce transparent antistatic hard coatings on poly(methyl methacrylate) (PMMA) substrates. Sizes of the modified particles, as determined by the dynamic
8 100/1 機電系 林清彬 教授 期刊論文 發佈 Fabrication microstructural analysis, and properties of poly(methyl methacrylate)/calcium carbonate particulates nanocomposites. , [100-1] :Fabrication microstructural analysis, and properties of poly(methyl methacrylate)/calcium carbonate particulates nanocomposites.期刊論文Fabrication microstructural analysis, and properties of poly(methyl methacrylate)/calcium carbonate particulates nanocomposites.Chang, Z.C.; Lin, C.B.; Chou, Y.-C.; Lee, H.-C.gas-synthesis;glass transition;microstructure;Nanocomposites;Poly(methyl methacrylate)Advances in Polymer Technology 31(4), pp.280-291The poly(methyl methacrylate) (PMMA)/nanometer-scaled calcium carbonate particulate nanocomposites prepared by means of the gas-synthesis was investigated. PMMA absorbed the saturated solvent mixture (the ratio of calcium chloride dehydrate and methanol at 1.5, 4.5, and 6.0 g/100 g) at 40–60° and then desorbed the methanol completely and then CO2 gas diffused into the desorbed completely in specimens for 48 h at 60°, approximately 30-nm calcium carbonate particulates were precipitated evenly to distribute in the PMMA matrix. The content of calcium carbo
9 101/2 機電系 林清彬 教授 期刊論文 發佈 Effect of size on average molecular weight of poly (methyl methacrylate) micropattern during hot embossing. , [101-2] :Effect of size on average molecular weight of poly (methyl methacrylate) micropattern during hot embossing.期刊論文Effect of size on average molecular weight of poly (methyl methacrylate) micropattern during hot embossing.Lin, C.B.; Chang, Z.-C.; Ho, J.-S.; Hsiao, C.F.Average Molecular Weight;Hot Embossing;Number Average Molecular Weight;Poly(methyl methacrylate) (PMMA)Advanced Materials Research 683, pp.133-136Hot-embossing experiments were conducted on poly (methyl methacrylate) orthogonal arrays with base widths of 1μm, 3μm, 5μm, 10μm, and 50μm. The relationship between the base width with respect to average molecular weight and number average molecular weight of micropattern were also investigated. It was discovered that the average molecular weight and number average molecular weight decreased as the base width increased.en_US1662-8985國內EI;否TWN
10 101/1 機電系 林清彬 教授 期刊論文 發佈 Effect of Size on Average Molecular Weight of Poly (Methyl Methacrylate) Micropattern during Hot Embossing , [101-1] :Effect of Size on Average Molecular Weight of Poly (Methyl Methacrylate) Micropattern during Hot Embossing期刊論文Effect of Size on Average Molecular Weight of Poly (Methyl Methacrylate) Micropattern during Hot EmbossingLin, C.B.; Chang, Z.-C.; Ho, J.-S.; Hsiao, C.F.淡江大學機械與機電工程學系Pfaffikon: Scientific.NetAdvanced Materials Research 683, pp.133-136Submitted by 清彬 林 (cblin@mail.tku.edu.tw) on 2015-06-10T13:57:21Z&#x0D; No. of bitstreams: 0;2015-06-11 補正完成 by 何雯婷;Made available in DSpace on 2015-06-10T13:57:22Z (GMT). No. of bitstreams: 0;tku_id: 000100618en1662-8985國外SCICHE<links><record><name>機構典藏連結</name><url>http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/103291</url></record></links>
11 96/2 機電系 林清彬 教授 期刊論文 發佈 The Effect of Crack Orientation on Ethanol-Induced Crack Healing in Poly (Methyl Methacrylate) , [96-2] :The Effect of Crack Orientation on Ethanol-Induced Crack Healing in Poly (Methyl Methacrylate) 期刊論文The Effect of Crack Orientation on Ethanol-Induced Crack Healing in Poly (Methyl Methacrylate) 何金新; Ho, Jin-shin; 林清彬; Lin, Ching-bin; Chang, Zue-chin淡江大學機械與機電工程學系Line- and Cross-Crack Healing;Poly(Methyl Methacrylate);Ethanol臺北縣:淡江大學淡江理工學刊 = Tamkang journal of science and engineering 11(1),頁7-16The line- and the cross-crack healing of Poly(methyl methacrylate) (PMMA) under the ethanol treatment at 40 C~60 C have been studied. The cross-crack means that the crack plane is vertical to the crack plane of the line-crack. The effective glass transition temperature of PMMAis reduced after the ethanol treatment. Both crack healings only occur at the effective glass transition temperature lower than the transport temperature. Both crack closure rates are constant. The closure rate of the cross-crack is higher than that of the line-crack. The analyses of the surface morphology and mechanical st
12 93/1 化材系 黃國楨 教授 期刊論文 發佈 Preparation of silica filled poly(2-hydroxymethyl methacrylate) nanocomposites cured by photoirradiation during sol-gel process , [93-1] :Preparation of silica filled poly(2-hydroxymethyl methacrylate) nanocomposites cured by photoirradiation during sol-gel process期刊論文Preparation of silica filled poly(2-hydroxymethyl methacrylate) nanocomposites cured by photoirradiation during sol-gel processLin, Dar-jong; Chen, Ching-chung; Su, Yi-che; Huang, Shu-hui; Cheng, Liao-ping淡江大學化學工程與材料工程學系Journal of applied polymer science 94(5), pp.1927-1935tku_id: 000062592; 000094910;Submitted by 曉芬 游 (139570@mail.tku.edu.tw) on 2011-10-23T16:57:42Z No. of bitstreams: 0;Made available in DSpace on 2011-10-23T16:57:44Z (GMT). No. of bitstreams: 0en國外SCI;EI;否USA<links><record><name>機構典藏連結</name><url>http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/71205</url></record></links>
13 100/1 機電系 林清彬 教授 期刊論文 發佈 Fabrication, microstructural analysis, and properties of poly(methyl methacrylate)/calcium carbonate particulates nanocomposites , [100-1] :Fabrication, microstructural analysis, and properties of poly(methyl methacrylate)/calcium carbonate particulates nanocomposites期刊論文Fabrication, microstructural analysis, and properties of poly(methyl methacrylate)/calcium carbonate particulates nanocompositesChang, Z.C.; Lin, C.B.; Chou, Yi-Chun; Lee, Hung-Chou淡江大學機械與機電工程學系gas-synthesis; glass transition; microstructure; Nanocomposites; Poly(methyl methacrylate)Hoboken: John Wiley & Sons, Inc.Advances in Polymer Technology 31(4), pp.280–291The poly(methyl methacrylate) (PMMA)/nanometer-scaled calcium carbonate particulate nanocomposites prepared by means of the gas-synthesis was investigated. PMMA absorbed the saturated solvent mixture (the ratio of calcium chloride dehydrate and methanol at 1.5, 4.5, and 6.0 g/100 g) at 40–60° and then desorbed the methanol completely and then CO2 gas diffused into the desorbed completely in specimens for 48 h at 60°, approximately 30-nm calcium carbonate particulates were precipitated evenly to dist
14 101/1 化材系 林達鎔 教授 期刊論文 發佈 Network Nano-Porous Poly(vinylidene fluoride-co-hexafluoropropene) Membranes by Nano-Gelation Assisted phase Separation of Poly(vinylidene fluoride-co-hexafluoropropene)/Poly(methyl methacrylate) Blend Precursor in Toluene , [101-1] :Network Nano-Porous Poly(vinylidene fluoride-co-hexafluoropropene) Membranes by Nano-Gelation Assisted phase Separation of Poly(vinylidene fluoride-co-hexafluoropropene)/Poly(methyl methacrylate) Blend Precursor in Toluene期刊論文Network Nano-Porous Poly(vinylidene fluoride-co-hexafluoropropene) Membranes by Nano-Gelation Assisted phase Separation of Poly(vinylidene fluoride-co-hexafluoropropene)/Poly(methyl methacrylate) Blend Precursor in TolueneLin, Dar-Jong; Lin, Chun-Liang; Guo, Shyuan-Yu淡江大學化學工程與材料工程學系Washington: American Chemical SocietyMacromolecules 45(21), pp.8824–8832Network nanoporous poly(vinylidene fluoride-co-hexafluoropropene (PVDF–HFP) membrane formation mechanism via poly(methyl methacrylate) (PMMA) leaching from PVDF–HFP/PMMA blend film was studied. The blends of PVDF–HFP with PMMA comprise miscible amorphous phase much larger in quantity than those of poly(vinylidene fluoride) (PVDF) with PMMA. The residual PVDF–HFP crystalline phase which may present in very small frac
15 88/2 化材系 鄭廖平 教授 期刊論文 發佈 Phase behavior of a water/2-propanol/poly(methyl methacrylate) cosolvent system , [88-2] :Phase behavior of a water/2-propanol/poly(methyl methacrylate) cosolvent system期刊論文Phase behavior of a water/2-propanol/poly(methyl methacrylate) cosolvent systemCheng, Liao Ping; Shaw, Horng-Yue淡江大學化學工程與材料工程學系cosolvency;membrane;poly(methyl methacrylate)Hoboken: John Wiley & Sons, Inc.Journal of Polymer Science, Part B: Polymer Physics 38(5), pp.747-754A phase diagram of poly(methyl methacrylate) in mixtures of water and 2-propanol, individually nonsolvents for the polymer, was studied at 25 °C. For this system, there were two liquid–liquid demixing regions separated by a miscible region. This cosolvent phenomenon was thought to be a joint effect of the nonsolvents. The phase behavior was modeled according to modified Flory–Huggins chemical-potential equations, which accounted for the possible contribution from a ternary interaction in terms of a lumped parameter, χ123. The calculated phase-equilibrium curves (binodals) agreed well with the measured results. By contrast, if only binar
16 100/2 化材系 張朝欽 副教授 期刊論文 發佈 Preparation and characterization of TiO2 sols and their UV-cured hybrid thin films on plastic substrates , [100-2] :Preparation and characterization of TiO2 sols and their UV-cured hybrid thin films on plastic substrates期刊論文Preparation and characterization of TiO2 sols and their UV-cured hybrid thin films on plastic substratesChang, Chao-Ching; Cheng, Liao-Ping; Lin, Chia-Ying; Yu, Yang-Yen淡江大學化學工程與材料工程學系New York: Springer New York LLCJournal of Sol-Gel Science and Technology 63(1), pp.30-35In this research, TiO2 sols were synthesized via a sol–gel reaction at room temperature followed by heating under reflux. Hybrid thin films were prepared using the TiO2 sols and dipentaerythritol hexacrylate on poly(methyl methacrylate) substrates via spin coating followed by UV-curing. The images of transmission electron microscopy (TEM) and results of dynamic light scattering (DSL) showed that some originally synthesized TiO2 nanoparticles aggregated while many small-sized (~5 nm) TiO2 nanoparticles still existed after reflux heating. The synthesized TiO2 sols showed poor photocatalytic ability, which might avo
17 100/2 化材系 鄭廖平 教授 期刊論文 發佈 Preparation and characterization of TiO2 sols and their UV-cured hybrid thin films on plastic substrates , [100-2] :Preparation and characterization of TiO2 sols and their UV-cured hybrid thin films on plastic substrates期刊論文Preparation and characterization of TiO2 sols and their UV-cured hybrid thin films on plastic substratesChang, Chao-Ching; Cheng, Liao-Ping; Lin, Chia-Ying; Yu, Yang-Yen淡江大學化學工程與材料工程學系New York: Springer New York LLCJournal of Sol-Gel Science and Technology 63(1), pp.30-35In this research, TiO2 sols were synthesized via a sol–gel reaction at room temperature followed by heating under reflux. Hybrid thin films were prepared using the TiO2 sols and dipentaerythritol hexacrylate on poly(methyl methacrylate) substrates via spin coating followed by UV-curing. The images of transmission electron microscopy (TEM) and results of dynamic light scattering (DSL) showed that some originally synthesized TiO2 nanoparticles aggregated while many small-sized (~5 nm) TiO2 nanoparticles still existed after reflux heating. The synthesized TiO2 sols showed poor photocatalytic ability, which might avo
18 93/1 航太系 陳慶祥 教授 期刊論文 發佈 Methanol- and ethanol-induced convex deformation and macrovoid formation of poly(methyl methacrylate) , [93-1] :Methanol- and ethanol-induced convex deformation and macrovoid formation of poly(methyl methacrylate)期刊論文Methanol- and ethanol-induced convex deformation and macrovoid formation of poly(methyl methacrylate)Lin, C. B.; Chen, C. S.; Chen, Zhi-Hong; Su, Nan-Ching淡江大學航空太空工程學系poly(methyl methacrylate); polycarbonate; diffusion; microdeformationHoboken: John Wiley & Sons, Inc.Journal of Applied Polymer Science 93(5), pp.2254-2261Methanol- and ethanol-induced convex deformation and macrovoid formation in poly(methyl methacrylate) (PMMA) through sandwich structures, consisting of polycarbonate (PC)/PMMA/PC was investigated. The sandwich structures had a circular hole on the outer PC layer, which allowed the solvent to contact with PMMA. Both single-convex and double-convex deformations of the PMMA layer were produced, depending upon the hole diameter. For a fixed hole diameter, there was an optimum PMMA thickness, which produced maximum curvature for the double-convex deformation. The physical
19 97/1 化材系 董崇民 教授 期刊論文 發佈 Thermal degradation behavior of PMMA synthesized by emulsifier-free emulsion polymerization with a Cu2+/HSO3− redox system , [97-1] :Thermal degradation behavior of PMMA synthesized by emulsifier-free emulsion polymerization with a Cu2+/HSO3− redox system期刊論文Thermal degradation behavior of PMMA synthesized by emulsifier-free emulsion polymerization with a Cu2+/HSO3− redox systemChiu, Tso-Pei; Don, Trong-Ming淡江大學化學工程與材料工程學系emulsion polymerization; redox initiator; poly(methyl methacrylate); apparent activity energyHoboken: John Wiley & Sons, Inc.Journal of Applied Polymer Science 111(1), pp.388-395In this study, poly(methyl methacrylate) (PMMA) latex was synthesized in an emulsifier-free emulsion polymerization at 60°C using a Cu2+/HSO redox initiator system with different concentrations of Cu2+. The experimental results showed that the monomer conversion reached above 90% for all systems. Zeta potential was all negative due to the bonded bisulfite ion and the magnitude was greater than 30 mV, providing the stability of PMMA emulsion. The morphology of the latex observed by scanning electron microscope revealed a uni
20 93/1 化材系 鄭廖平 教授 期刊論文 發佈 Preparation of silica filled poly(2-hydroxymethyl methacrylate) nanocomposites cured by photoirradiation during sol-gel process , [93-1] :Preparation of silica filled poly(2-hydroxymethyl methacrylate) nanocomposites cured by photoirradiation during sol-gel process期刊論文Preparation of silica filled poly(2-hydroxymethyl methacrylate) nanocomposites cured by photoirradiation during sol-gel processLin, Dar-jong; Chen, Ching-chung; Su, Yi-che; Huang, Shu-hui; Cheng, Liao-ping淡江大學化學工程與材料工程學系Journal of applied polymer science 94(5), pp.1927-1935tku_id: 000062592; 000094910;Submitted by 曉芬 游 (139570@mail.tku.edu.tw) on 2011-10-23T16:57:42Z No. of bitstreams: 0;Made available in DSpace on 2011-10-23T16:57:44Z (GMT). No. of bitstreams: 0en國外SCI;EI;否USA<links><record><name>機構典藏連結</name><url>http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/71205</url></record></links>
21 81/2 機電系 林清彬 教授 期刊論文 發佈 The Fracture Behavior of Oriented Poly(Methyl Methacrylate) , [81-2] :The Fracture Behavior of Oriented Poly(Methyl Methacrylate)期刊論文The Fracture Behavior of Oriented Poly(Methyl Methacrylate)林清彬淡江大學機械與機電工程學系Hoboken: John Wiley & Sons, IncPolymer Engineering and Science 33(7), pp.431-436tku_id: 000100618;Submitted by 曉芬 游 (139570@mail.tku.edu.tw) on 2011-10-20T13:46:43Z No. of bitstreams: 0;Made available in DSpace on 2011-10-20T13:46:44Z (GMT). No. of bitstreams: 0;20131126 verified by Sujenen0032-3888;1548-2634國外否USA<links><record><name>機構典藏連結</name><url>http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/65400</url></record></links>
22 83/2 機電系 林清彬 教授 期刊論文 發佈 A theory of the rate of crack closure poly(methyl methacrylate)molecular chain model , [83-2] :A theory of the rate of crack closure poly(methyl methacrylate)molecular chain model期刊論文A theory of the rate of crack closure poly(methyl methacrylate)molecular chain model林清彬淡江大學機械與機電工程學系J. Applied Physics Polymertku_id: 000100618;Submitted by 曉芬 游 (139570@mail.tku.edu.tw) on 2011-10-20T13:35:57Z No. of bitstreams: 0;Made available in DSpace on 2011-10-20T13:35:58Z (GMT). No. of bitstreams: 0en<links><record><name>機構典藏連結</name><url>http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/65269</url></record></links>
23 95/2 化材系 董崇民 教授 期刊論文 發佈 Polyurethane/Polyaniline and Polyurethane-Poly(methyl methacrylate)/Polyaniline Conductive Core-Shell Particles: Preparation, Morphology, and Conductivity , [95-2] :Polyurethane/Polyaniline and Polyurethane-Poly(methyl methacrylate)/Polyaniline Conductive Core-Shell Particles: Preparation, Morphology, and Conductivity期刊論文Polyurethane/Polyaniline and Polyurethane-Poly(methyl methacrylate)/Polyaniline Conductive Core-Shell Particles: Preparation, Morphology, and Conductivity董崇民; Don, Trong-ming; Li, Chien-yu; Chi, Wen-yenu淡江大學化學工程與材料工程學系Journal of Polymer Science: Part A: Polymer Chemistry 45, pp.3902-3911tku_id: 000118838;Submitted by 曉芬 游 (139570@mail.tku.edu.tw) on 2011-10-13T05:07:24Z No. of bitstreams: 0;Made available in DSpace on 2011-10-13T05:07:25Z (GMT). No. of bitstreams: 0en國外否USA<links><record><name>機構典藏連結</name><url>http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/60159</url></record></links>
24 89/2 化材系 董崇民 教授 期刊論文 發佈 Structures and thermal properties of chitosan-modified poly(methyl methacrylate) , [89-2] :Structures and thermal properties of chitosan-modified poly(methyl methacrylate)期刊論文Structures and thermal properties of chitosan-modified poly(methyl methacrylate)董崇民; Don, Trong-ming淡江大學化學工程與材料工程學系Journal of polymer science, part A : Polymer chemistry 39(10), pp.1646-1655tku_id: 000118838;Submitted by 曉芬 游 (139570@mail.tku.edu.tw) on 2011-10-13T05:05:48Z No. of bitstreams: 0;Made available in DSpace on 2011-10-13T05:05:48Z (GMT). No. of bitstreams: 0en1099-0518國外否USA<links><record><name>機構典藏連結</name><url>http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/60149</url></record></links>
25 91/1 化材系 董崇民 教授 期刊論文 發佈 Synthesis of chitosan-modified poly(methyl methacrylate) by emulsion polymerization , [91-1] :Synthesis of chitosan-modified poly(methyl methacrylate) by emulsion polymerization期刊論文Synthesis of chitosan-modified poly(methyl methacrylate) by emulsion polymerizationHsu, Shih-chang; 董崇民; Don, Trong-ming; Chiu, Wen-yen淡江大學化學工程與材料工程學系Wiley-BlackwellJournal of applied polymer science 86(12), pp.3047-3056tku_id: 000118838;Made available in DSpace on 2010-03-09T01:54:29Z (GMT). No. of bitstreams: 1 : 118 bytes, checksum: 1adc118e2a720f13a546ceb0887fd1ff (MD5)en0021-8995國外否USA<links><record><name>機構典藏連結</name><url>http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/44124</url></record></links>
26 97/1 化材系 董崇民 教授 期刊論文 發佈 Synthesis and characterization of poly(methyl methacrylate) nanoparticles by emulsifier-free emulsion polymerization with a redox-initiated system , [97-1] :Synthesis and characterization of poly(methyl methacrylate) nanoparticles by emulsifier-free emulsion polymerization with a redox-initiated system期刊論文Synthesis and characterization of poly(methyl methacrylate) nanoparticles by emulsifier-free emulsion polymerization with a redox-initiated systemChiu, Tso-pei; 董崇民; Don, Trong-ming淡江大學化學工程與材料工程學系Wiley-BlackwellJournal of Applied Polymer Science 109(6), pp.3622-3630In this study, the emulsifier-free emulsion polymerization of methyl methacrylate (MMA) was initiated directly by a Cu2+/HSO redox system. Latex particles with negative charge due to the bonded anionic sulfite ion were successfully synthesized after 2 h of reaction at 40-60°C. Scanning electron microscopy pictures showed a uniform particle size distribution, and the average size decreased from 223 to 165 nm wit increasing reaction temperature from 40 to 60°C. The initiation step in the polymerization mechanism was proven to be a redox reaction, in which Cu2+ oxidized the bisulf
27 95/1 化材系 鄭廖平 教授 期刊論文 發佈 Preparation and characterization of microporous PVDF/PMMA composite membranes by phase inversion in water/DMSO solutions , [95-1] :Preparation and characterization of microporous PVDF/PMMA composite membranes by phase inversion in water/DMSO solutions期刊論文Preparation and characterization of microporous PVDF/PMMA composite membranes by phase inversion in water/DMSO solutionsLin, Dar-jong; Chang, Chi-lin; Lee, Chih-kang; Cheng, Liao-ping淡江大學化學工程與材料工程學系Poly(vinylidene fluoride); Poly(methyl methacrylate); Membrane; Morphology; CrystallizationKidlington: PergamonEuropean Polymer Journal 42(10), pp.2407-2418PMMA/PVDF composite membranes were prepared by isothermal immersion–precipitation of dope solutions consisting of PMMA, PVDF, and DMSO into both harsh and soft nonsolvent baths. The effects of PMMA and DMSO contents on the membrane morphology, crystal structure, thermal behavior and tensile strength of the formed membrane were investigated. For a PMMA-free casting dope immersed in a harsh bath, such as pure water, the formed membrane exhibited a typical asymmetric morphology characterized by skin, finger-like macrovo
28 95/1 化材系 林達鎔 教授 期刊論文 發佈 Preparation and characterization of microporous PVDF/PMMA composite membranes by phase inversion in water/DMSO solutions , [95-1] :Preparation and characterization of microporous PVDF/PMMA composite membranes by phase inversion in water/DMSO solutions期刊論文Preparation and characterization of microporous PVDF/PMMA composite membranes by phase inversion in water/DMSO solutionsLin, Dar-jong; Chang, Chi-lin; Lee, Chih-kang; Cheng, Liao-ping淡江大學化學工程與材料工程學系Poly(vinylidene fluoride); Poly(methyl methacrylate); Membrane; Morphology; CrystallizationKidlington: PergamonEuropean Polymer Journal 42(10), pp.2407-2418PMMA/PVDF composite membranes were prepared by isothermal immersion–precipitation of dope solutions consisting of PMMA, PVDF, and DMSO into both harsh and soft nonsolvent baths. The effects of PMMA and DMSO contents on the membrane morphology, crystal structure, thermal behavior and tensile strength of the formed membrane were investigated. For a PMMA-free casting dope immersed in a harsh bath, such as pure water, the formed membrane exhibited a typical asymmetric morphology characterized by skin, finger-like macrovo
29 96/1 機電系 林清彬 教授 期刊論文 發佈 The Effect of Crack Orientation on Methanol-Induced Crack Healing in Poly(Methyl Methacrylate) , [96-1] :The Effect of Crack Orientation on Methanol-Induced Crack Healing in Poly(Methyl Methacrylate) 期刊論文The Effect of Crack Orientation on Methanol-Induced Crack Healing in Poly(Methyl Methacrylate) 何金新; Ho, Jin-shin; 林清彬; Lin, Ching-bin; Chang, Zue-chin淡江大學機械與機電工程學系Line and Cross-Crack Healing;Poly(Methyl Methacrylate);Methanol臺北縣:淡江大學淡江理工學刊=Tamkang journal of science and engineering 10(4),頁369-378The line- and the cross-crack healing of Poly(methyl methacrylate, PMMA) under the methanol treatment at 40 C~60 C have been studied. The cross-crack means that the crack plane is vertical to the crack plane of the line-crack. The effective glass transition temperature of PMMAis reduced after the methanol treatment. Both crack healings only occur at the effective glass transition temperature lower than the transport temperature. Both crack closure rates are constant. The closure rate of the cross-crack is higher than that of the line-crack. The analyses of the surfacemorphology and mechanical s
30 84/2 機電系 林清彬 教授 期刊論文 發佈 Poly(methyl methacrylate) interpenetrating cell model , [84-2] :Poly(methyl methacrylate) interpenetrating cell model期刊論文Poly(methyl methacrylate) interpenetrating cell model林清彬; Lin, C. B.; Lee, Sanboh淡江大學機械與機電工程學系ElsevierPolymer 37(13), pp.2793-2800tku_id: 000100618;Made available in DSpace on 2010-03-26T11:44:16Z (GMT). No. of bitstreams: 1 : 118 bytes, checksum: c738f18ae81d6e1840832f7c9f697bf7 (MD5)en0032-3861國外否NLD<links><record><name>機構典藏連結</name><url>http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/45682</url></record></links>
[第一頁][上頁]1[次頁][最末頁]目前在第 1 頁 / 共有 30 筆查詢結果