[第一頁][上頁]1[次頁][最末頁]目前在第 1 頁 / 共有 14 筆查詢結果

序號 | 學年期 | 教師動態 |
---|---|---|

1 | 102/1 | 電機系 陳巽璋 教授於 期刊論文 發佈 Continuous Phase Modulation (CPM) Revisited: Using Time-limited Phase Shaping Pulses , [102-1] ：Continuous Phase Modulation (CPM) Revisited: Using Time-limited Phase Shaping PulsesContinuous Phase Modulation, Time-limited Phase Shaping Pulse, Power Spectrum, Euclidean Distance, CContinuous Phase Modulation (CPM) Revisited: Using Time-limited Phase Shaping PulsesYang, Richard Hsin-Hsyong; Lee, Chia-Kun; Chern, Shiunn-Jang淡江大學電機工程學系Continuous Phase Modulation; Time-limited Phase ShapingTokyo: Denshi Jouhou Tsuushin GakkaiIEICE Transactions on Communication E96-B(11), pp.2828-2839Conventional CPM signals employ information sequence with time-unlimited phase shaping pulse (PSP) to achieve power and bandwidth efficient transmission. On the contrary, information sequence using time-limited PSP was believed to produce power-wasting data-independent discrete spectral lines in CPM spectra, and was suggested to be avoided. In this paper, we revisit this problem and adopt the time-limited PSP to replace the one with time-unlimited, it turns out to have an alternative solution to the CPM sc |

2 | 97/2 | 統計系 吳錦全 教授於 期刊論文 發佈 The communion bridge to Six Sigma and process capability indices , [97-2] ：The communion bridge to Six Sigma and process capability indices期刊論文The communion bridge to Six Sigma and process capability indicesChen K. S.; Ouyang L. Y.; Hsu C. H.;Wu C. C.淡江大學經營決策學系; 淡江大學統計學系Six Sigma; Process capability indices; Bilateral specifications; Unilateral specifications; CommunionDordrecht: Springer NetherlandsQuality & Quantity 43(3), pp.463-469Six Sigma has already become an efficient improvement technique adopted by a great number of enterprises. Numbers of Sigma has become a tool of measuring process capability in some enterprises. But some of enterprises still use process capability indices (PCIs) to measure the process capability. So numbers of Sigma and PCIs both can be used to measure the process capability. The paper will research the relationship between PCIs and numbers of Sigma. In bilateral specifications, the paper will research the relationship between the PCIs which are Cp, Cpk, Cpm and Cpmk, Spk and numbers of Sigma. In unilateral specifications, th |

3 | 97/2 | 管科系 歐陽良裕 教授於 期刊論文 發佈 The communion bridge to Six Sigma and process capability indices , [97-2] ：The communion bridge to Six Sigma and process capability indices期刊論文The communion bridge to Six Sigma and process capability indicesChen K. S.; Ouyang L. Y.; Hsu C. H.;Wu C. C.淡江大學經營決策學系; 淡江大學統計學系Six Sigma; Process capability indices; Bilateral specifications; Unilateral specifications; CommunionDordrecht: Springer NetherlandsQuality & Quantity 43(3), pp.463-469Six Sigma has already become an efficient improvement technique adopted by a great number of enterprises. Numbers of Sigma has become a tool of measuring process capability in some enterprises. But some of enterprises still use process capability indices (PCIs) to measure the process capability. So numbers of Sigma and PCIs both can be used to measure the process capability. The paper will research the relationship between PCIs and numbers of Sigma. In bilateral specifications, the paper will research the relationship between the PCIs which are Cp, Cpk, Cpm and Cpmk, Spk and numbers of Sigma. In unilateral specifications, th |

4 | 101/2 | 管科系 歐陽良裕 教授於 期刊論文 發佈 A new process capability analysis chart approach on the chip resistor quality management , [101-2] ：A new process capability analysis chart approach on the chip resistor quality management期刊論文A new process capability analysis chart approach on the chip resistor quality managementOuyang, Liang-Yuh; Hsu, Chang-Hsien; Yang, Chun-Ming淡江大學管理科學學系Accuracy;discrimination distance;precision;process capability analysis chart;process capability indicesLondon: Sage Publications Ltd.Journal of Engineering Manufacture 227(7), pp.1075-1082Process capability indices have been extensively used to determine whether the quality characteristics of the product meet the preset targets of the customer in manufacturing industries. However, these existing process capability indices cannot categorically determine improvement priorities for substandard quality characteristics. Besides, process capability indices also cannot effectively identify and measure deficiencies in process capability owing to accuracy, precision, or both. In this study, we combine the process capability index Cpm , minimum individual pr |

5 | 94/1 | 土木系 蔡明修 助理教授於 期刊論文 發佈 委託專案管理工程履約管理查核評估模式之建立 , [94-1] ：委託專案管理工程履約管理查核評估模式之建立期刊論文委託專案管理工程履約管理查核評估模式之建立Contract Performance Checking and Evaluation Model for PCM Projects鄭明淵; 蔡明修; 呂珠玉; 李曉萱淡江大學土木工程學系專業營建管理;查核評估模式;專案成功度;PCM;ANP;Checklist;Evaluation method;Project success臺北市：中華民國營建管理協會營建管理季刊 64，頁20-26本研究針對委託專案管理工程現況問題進行探討，依據文獻及實際案例調 查，建立委託專案管理工程履約管理查核表；並應用分析網路程序法（Analytic Network Process, ANP）發展出委託專案管理工程履約管理查核評估模式及查核 評估指標，以提供工程主辦人員根據履約管理查核指標值，進行履約管理查核評 估，並管控專案管理契約之履約情形。 為驗證履約管理查核評估指標與專案成功與否之關聯性，本研究先對工程專 案成功度作一定義，並搜集工程案例作履約管理查核評估及專案成功度之問卷調 查，經由模式驗證本研究所發展之履約管理查核評估指標對專案成功度確實具有 相當程度之影響且為正相關之關聯。;This research established performance checklist for the PCM project, and applied the Analytic Network Process (ANP) method to develop Contract Performance Management (CPM) checking and evaluation model for project management of owner. According to this model, the PCM contract performance can be determined which can be served as a reference for monitoring the performance of the PCM consultant. Moreover, this study identified the relations between CPM in |

6 | 101/1 | 電機系 陳巽璋 教授於 期刊論文 發佈 A novel class of CPM using overlapping separable phase shaping pulses , [101-1] ：A novel class of CPM using overlapping separable phase shaping pulses期刊論文A novel class of CPM using overlapping separable phase shaping pulsesYang, Richard Hsin-hsyong; Lee, Chia-kun Lee; Chern, Shiunn-jang; 陳巽璋淡江大學電機工程學系Continuous phase modulation (CPM), PAM decomposition, separable phase, compactorInstitute of Electronics, Information and Communication Engineers (IEICE)IEICE Communications Express 1(6), pp.202-208The decomposition of continuous phase modulation (CPM) signals into a set of PAM waveforms is a very effective approach to reduce the receiver complexity. Recently, CPM signals using rectangular frequency shaping (FS) pulses having the so-called separable phase (SP) property can be reformulated as a compactor connected with an equivalent CPFSK scheme, and was proved to have minimal number of PAM waveforms among the existing PAM approaches. In this letter, we propose a new class of phase separable CPM schemes, which is extended from our previous work. Here FS pulses are const |

7 | 97/1 | 統計系 吳錦全 教授於 期刊論文 發佈 Approximate Confidence Bounds for the Process Capability Index Cpm Based on Subsamples , [97-1] ：Approximate Confidence Bounds for the Process Capability Index Cpm Based on Subsamples期刊論文Approximate Confidence Bounds for the Process Capability Index Cpm Based on SubsamplesKuo, Hsin-Lin; Wu, Chin-Chuan; Hsu, Shu-Ching淡江大學統計學系Process Capability Index;Lower Confidence Bounds;Subsamples;Variable Sample Size;Relative Efficiency臺北縣：淡江大學International Journal of Information and Management Sciences 19(4), pp.601-620Most industrial uses of process capability ratio focus on computing and interpreting the point estimate of the desired quantity. Furthermore, the process measures are estimated based on a single random sample of observations from the normally distributed process that is in statistical control. In this article, we not only make good use of a better estimator of σ for moderate large sample size, but also consider various sample size to construct the lower confidence bounds based on subsamples in some detail in connection with minimum values for the process capability index Cpm. S |

8 | 92/2 | 土木系 楊亦東 副教授於 期刊論文 發佈 Discussion of "Comparison of Linear Scheduling Model and Repetitive Scheduling Method"by Kris G. Mattila and Amy Park , [92-2] ：Discussion of "Comparison of Linear Scheduling Model and Repetitive Scheduling Method"by Kris G. Mattila and Amy Park期刊論文Discussion of "Comparison of Linear Scheduling Model and Repetitive Scheduling Method"by Kris G. Mattila and Amy Park楊亦東; Ioannou, Photios G.淡江大學土木工程學系ASCE Journal of Construction Engineering and Management 130(3), pp.461-463This paper mistakenly treats the ‘‘controlling sequence’’ defined for the first time in Harris and Ioannou ~1998! as a synonym for the critical path in the traditional critical path method ~CPM!, by stating that ‘‘the control points in the repetitive scheduling method ~RSM! are used to define the controlling sequence of activities, the critical path in a CPM schedule, which in turn determines the project duration.’’ Yet, the introduction of the ‘‘controlling sequence’’ and its differentiation from the traditional critical path is a main contribution of RSM, which should be pointed out and recognized explicitly. By overlooking this import |

9 | 99/1 | 化學系 林志興 教授於 期刊論文 發佈 DFT study of self-coupling reaction of CF2 coadsorbed on Cu(111) surface for forming CF2=CF2 , [99-1] ：DFT study of self-coupling reaction of CF2 coadsorbed on Cu(111) surface for forming CF2=CF2期刊論文DFT study of self-coupling reaction of CF2 coadsorbed on Cu(111) surface for forming CF2=CF2Lin, Jyh-Shing; Lu, Shao-Yu; Chou, Wen-Chi淡江大學化學學系Density functional theory;Cu(111) surface;Self-coupling reaction;Density of states; Ultrasoft pseudopotentialsAmsterdam: Elsevier BV * North-HollandSurface Science 605(1-2), pp.131-137100學年度研究獎補助論文Total energy calculations based on the density functional theory (DFT) with ultrasoft pseudopotential, generalized gradient spin-polarized approximation and the partial structural constraint path minimization (PSCPM) method were carried out to establish the energetically more favorable reaction pathways for the self-coupling reaction of coadsorbed CF2(ads) leading to the formation of CF2=CF2(ads) on the Cu(111) surface. In addition, the calculated electronic properties, namely partial density of states (PDOS), suggest that the initial breaking of the Cu(111)– |

10 | 96/1 | 化學系 林志興 教授於 期刊論文 發佈 DFT Study of selective alpha-Fluoride Elimination of adsorbed CF3(ads) on both Ag(111) and Cu(111) surfaces , [96-1] ：DFT Study of selective alpha-Fluoride Elimination of adsorbed CF3(ads) on both Ag(111) and Cu(111) surfaces期刊論文DFT Study of selective alpha-Fluoride Elimination of adsorbed CF3(ads) on both Ag(111) and Cu(111) surfaces林志興淡江大學化學學系Washington: American Chemical SocietyJournal of Physical Chemistry C 112(3), pp.768-773Total-energy calculations based on (1) density functional theory (DFT) in connection with ultrasoft pseudopotential (USP) and generalized gradient spin-polarized approximation (GGSA), (2) the partial structural constraint path minimization (PSCPM) method, and (3) an analysis tool of the partial density of states (PDOS) have been used to investigate the possible energetic profile for the selective activation of C-F bonds, that is, the single a-fluoride elimination of adsorbed CF3(ads) on both Cu(111) and Ag(111) surfaces leading to adsorbed CF2(ads) and F-(ads) on both surfaces. Following our proposed most possible reaction pathway, namely, the diffusion of the hcp-hollow si |

11 | 97/1 | 企管系 高秀學 助理教授於 期刊論文 發佈 A CPM-Based bidirectional approach for Type-I assembly line balancing problem , [97-1] ：A CPM-Based bidirectional approach for Type-I assembly line balancing problem期刊論文A CPM-Based bidirectional approach for Type-I assembly line balancing problem第一類型組裝線平衡問題之雙向要徑啟發式演算法高秀學; 葉丁鴻淡江大學企業管理學系assembly line balancing problem;heuristic;critical path method;bidirectional中國工業工程學會Journal of the Chinese Institute of Industrial Engineers=工業工程學刊 25(6), pp.481-487In this paper we consider the so-called type-I assembly line balancing problem (ALBP-I), in which the objective is to minimize the number of workstations needed for a given cycle time. ALBP-I is one of the well-known NP-hard problems in operations management, and many optimal approaches (including 0-1 integer programming model, branch and bound algorithm, dynamic programming model, etc.) have been developed during the past decades. However, all optimal approaches share the disadvantage of being computationally inefficient in solving large-scale problems, and which makes heuristics a necessity in practice. We propose in this paper |

12 | 92/2 | 化學系 林志興 教授於 期刊論文 發佈 DFT study of the formation of CH2=CF2 through both methylene insertion and b-fluoride elimination on the Ag(111) surface , [92-2] ：DFT study of the formation of CH2=CF2 through both methylene insertion and b-fluoride elimination on the Ag(111) surface期刊論文DFT study of the formation of CH2=CF2 through both methylene insertion and b-fluoride elimination on the Ag(111) surface林志興; Lin, Jyh-shing; Chou, Wen-Chi淡江大學化學學系Fischer–Tropsch process;Ag(111) surface;ultrasoft pseudopotential;density functional theory;temperature-programmed reaction;generalized gradient spin-polarized approximationWorld Scientific PublishingSurface review and letter11(2), pp.229-234Total energy calculations based on (1) density functional theory (DFT) in connection with ultrasoft pseudopotential and generalized gradient spin-polarized approximation (GGSA) and (2) the partial structural constraint path minimization (PSCPM) method have been used to investigate the energetically more favorable pathway for methylene (CH2) insertion into the Ag–CF3 bond followed by β-fluoride elimination to generate an isolated CH2=CF2(g) above the Ag(111) surface. T |

13 | 96/1 | 化學系 林志興 教授於 期刊論文 發佈 DFT study of selective α-fluoride elimination of adsorbed CF3(ads) on both Ag(111) and Cu(111) surfaces , [96-1] ：DFT study of selective α-fluoride elimination of adsorbed CF3(ads) on both Ag(111) and Cu(111) surfaces期刊論文DFT study of selective α-fluoride elimination of adsorbed CF3(ads) on both Ag(111) and Cu(111) surfaces林志興; Lin, Jyh-shing; Chou, Wen-chi淡江大學化學學系American Chemical Society (ACS)Journal of Physical Chemistry C 112(3), pp.768-773Total-energy calculations based on (1) density functional theory (DFT) in connection with ultrasoft pseudopotential (USP) and generalized gradient spin-polarized approximation (GGSA), (2) the partial structural constraint path minimization (PSCPM) method, and (3) an analysis tool of the partial density of states (PDOS) have been used to investigate the possible energetic profile for the selective activation of C−F bonds, that is, the single α-fluoride elimination of adsorbed CF3(ads) on both Cu(111) and Ag(111) surfaces leading to adsorbed CF2(ads) and F(ads) on both surfaces. Following our proposed most possible reaction pathway, namely, the diffusion of the |

14 | 94/2 | 統計系 吳錦全 教授於 期刊論文 發佈 Approximate Confidence Bounds for the Process Capability Index Cpm Based on the Range , [94-2] ：Approximate Confidence Bounds for the Process Capability Index Cpm Based on the Range期刊論文Approximate Confidence Bounds for the Process Capability Index Cpm Based on the RangeKuo, Hsin-lin; 吳錦全; Wu, Chin-chuan; Wu, Chao-hsien淡江大學統計學系淡江大學International Journal of Information and Management Sciences 17(2), pp.57-70tku_id: 000038205;Made available in DSpace on 2009-11-30T04:56:24Z (GMT). No. of bitstreams: 1 : 118 bytes, checksum: e063faa279ef0bd88534f9bada4e3eec (MD5)en1017-1819<links><record><name>機構典藏連結</name><url>http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/20682</url></record></links> |

[第一頁][上頁]1[次頁][最末頁]目前在第 1 頁 / 共有 14 筆查詢結果