STUDY ON THE FLOW-FIBER COUPLING EFFECT AND ITS INFLUENCE ON THE SHRINKAGE OF FIBER-REINFORCED PLASTIC (FRP) INJECTION PARTs
學年 109
學期 2
出版（發表）日期 2021-05-13
作品名稱 STUDY ON THE FLOW-FIBER COUPLING EFFECT AND ITS INFLUENCE ON THE SHRINKAGE OF FIBER-REINFORCED PLASTIC (FRP) INJECTION PARTs
作品名稱（其他語言）
著者 Cheng-Hong Lai; Chao-Tsai (CT) Huang; Jia-Hao Chu; Wei-Wen Fu; Sheng-Jye Hwang; Hsin-Shu Peng; Chih-Che Wu; Chun-I Tu
單位
出版者
著錄名稱、卷期、頁數 SPE Technical Papers, ANTEC2021
摘要 The fiber-reinforced plastics (FRP) material has been applied into industry as one of the major lightweight technologies, especially for automotive or aerospace products. The reason why fibers can enhance plastics is because of their microstructures. One of those microstructures is fiber orientation distribution. Since the fiber orientations inside plastic matrix are very complex, they are not easy to be visualized and managed. In addition, there might be some interaction between flow and fiber during the injection molding processing, but not fully understood yet. In this study, the flow-fiber coupling effect on FRP injection parts has been investigated using a geometry system with three ASTM D638 specimens. The study methods include both numerical simulation and experimental observation. Results showed that in the presence of flow-fiber coupling the melt flow front advancement presents some variation, specifically at the geometrical corners of the system. Furthermore, through the fiber orientation distribution (FOD) study, the flow-fiber coupling effect is not significantly at the near gate region (NRG). It might result from too strong shear force to hold down the appearance of the flow-fiber interaction. However, at the end of filling region (EFR), the flow-fiber coupling effect tries to diminish the flow direction orientation tensor component A11 and enhance the cross-flow orientation tensor component A22 simultaneously. It ends up with the cross-flow direction dominant at the EFR. This orientation distribution behavior variation has been verified using micro-computerized tomography (-CT) scan and images analysis by AVIZO software. Finally, the flow-fiber coupling effect also verified based on the tensile stress testing and the shrinkage of the injected parts through different flow domains.
關鍵字 fiber-reinforced plastics (FRP);flow-fiber coupling;micro-computerized tomography (-CT)
語言 en_US
ISSN
期刊性質 國外
收錄於 EI
產學合作
通訊作者 Chao-Tsai Huang
審稿制度 是
國別 USA
公開徵稿
出版型式 ,電子版
相關連結

機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/121110 )

SDGS 永續城市與社區,負責任的消費與生產,尊嚴就業與經濟發展,產業創新與基礎設施