期刊論文
| 學年 | 94 |
|---|---|
| 學期 | 2 |
| 出版（發表）日期 | 2006-02-01 |
| 作品名稱 | A Comparison between Triangular Grooves, Star Grooves and Rhombus Grooves in Micro Heat Pipe Manufacture |
| 作品名稱（其他語言） | 三角形、星形與菱形微熱管製作與比較 |
| 著者 | 蔡聲鴻; 陳育堂; 康尚文; Kang, Shung-wen; 張裕民 |
| 單位 | 淡江大學機械與機電工程學系 |
| 出版者 | 中國機械工程學會 |
| 著錄名稱、卷期、頁數 | Journal of the Chinese Society of Mechanical Engineers 27(1), pp.1-5 |
| 摘要 | This paper describes the development of triangular grooved MHP, star grooved MHP and rhombus grooved MHP their fabrication and testing. The heat transfer performance of micro heat pipe was enhanced due to the better capillarity provided by more acute angles and micro gaps. Triangular grooved MHP, Star grooved MHP and rhombus grooved MHP were fabricated by bulk micro machining on 4-inch (100) silicon wafers. Finally, triangular grooved MHP structure was bonded by employing anodic bonding technique. Star grooved MHP and rhombus grooved MHP structure was bonded by employing an eutectic bonding technique. Testing was conducted to evaluate the performance over a range of working fluid volume and heat fluxes. A heater was glued on the evaporator section of the heat pipe, cold water was poured through a copper pipe in the condenser section, and K-type thermocouples were pasted on the micro heat pipe in the direction of the length. Then the thermocouples were joined to a data acquisition system and Fourier’s Law was used to calculate the effective thermal conductivity. The best thermal conductivities of triangular grooved MHP, star grooved MHP and rhombus grooved MHP are 208 W/mK, 277.9 W/mK and 289.4 W/mK, respectively. |
| 關鍵字 | Micro Heat Pipe (MHP);thermal conductivity;eutectic bonding |
| 語言 | en_US |
| ISSN | 0257-9731 |
| 期刊性質 | 國內 |
| 收錄於 | |
| 產學合作 | |
| 通訊作者 | |
| 審稿制度 | 否 |
| 國別 | TWN |
| 公開徵稿 | |
| 出版型式 | ,紙本 |
| 相關連結 |
機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/45791 ) |