會議論文
| 學年 | 89 |
|---|---|
| 學期 | 1 |
| 發表日期 | 2000-12-08 |
| 作品名稱 | 鋁基/碳化矽顆粒型複合材料之熱切削：無進刀切削對粗糙度與加熱切削對刀具壽命之影響 Hot Machining of Particulate SiC Alunium Composite Material：Effect of No-Depth Cutting and Hot Machining on Roughness and Tool Life |
| 作品名稱（其他語言） | |
| 著者 | 劉偉均; 莊育憲; 陳炤彰 |
| 作品所屬單位 | 淡江大學機械與機電工程學系 |
| 出版者 | |
| 會議名稱 | 中國機械工程學會第十七屆全國學術研討會=The 17th National Conference on Mechanical Engineering the Chinese Society of Mechanical Engineers |
| 會議地點 | 高雄, 臺灣 |
| 摘要 | 碳化矽顆粒作為加強材的鋁合金(SiCp/Al)被歸類為難切削材料。在室溫下以低切削速度及低進給率進行切削會導致移除率減少、刀具壽命減少和較大的粗糙度。為了改善這個缺點，以低溫(-80℃)切削鋁基/碳化矽顆粒型複合材料在此之前的研究中已經嘗試過，低溫切削可以減小粗糙度，但對於刀具壽命之延長並沒有幫助。所以低溫切削僅對於精密切削有好處。而熱切削則可在切削SiCp/Al時增加刀具壽命，因為在熱切削之中可以利用在刀具上生成構成刀刃(BUE)來延長刀具壽命，但是從實驗數據得知對於粗糙度並沒有影響。因此熱切削的方法可以用在粗切削之中。在本實驗中發現在熱切削之後進行無進給切削可以比單獨施予熱切削者有更好的粗糙度。 The aluminum alloy reinforced with silicon carbide particulate(SiCp/Al) is classified as hard machining material because itsdifficulty on machining with high precision. The room temperaturecutting with lower cutting speed and feeding rate on this materialresults in decrease of removal rate, shorter tool life and largerroughness. In order to improve the shortness, low temperature (-80℃)has been tried on the cutting of particulate SiC aluminum compositematerial (based in previous study). The low temperature cuttingdecreased the roughness but had no effect on tool life. The method oflow temperature cutting is only good for precision cutting. Hotmachining (200℃) has been used on cutting of SiCp/Al material toincrease tool life. Because of forming the BUE on tool, but had noeffect on roughness from previous experimental data. Thus the methodof hot machining is only good for rough cutting. In this paper theno-depth cutting after the hot machining on SiCp/Al material has shownthe decrease of roughness compared to that was cut by hot machiningalone. |
| 關鍵字 | 熱切削;複合材料;無進給切削;構成刃尖;Hot Machining;Composite;No-Depth Cutting;Build Up Edge |
| 語言 | zh_TW |
| 收錄於 | |
| 會議性質 | 國內 |
| 校內研討會地點 | |
| 研討會時間 | 20001208~20001209 |
| 通訊作者 | |
| 國別 | TWN |
| 公開徵稿 | Y |
| 出版型式 | 紙本 |
| 出處 | 中國機械工程學會第十七屆全國學術研討會論文集〈第四冊製造與材料〉=Proceedings of the 17th National Conference on Mechanical Engineering the Chinese Society of Mechanical Engineers，頁767-774 |
| 相關連結 |
機構典藏連結 ( http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/96385 ) |